Magnet | NdFeB Rare Earth Permanent Magnets

N35SH Disc Magnets for Rotary Position Sensors

Magnet description:
Magnet ID:HSND-0062.5D-35SH
N35SH Disc Magnets Part No.: HSND-0062.5D-35SHMagnetisation Grade: N35SHMaterial: Sintered Neodymium-Iron-Boron (Rare Earth NdFeB)Plating / Coating: Nickel (Ni-Cu-Ni)Magnet Shape: Disc, Disk, RoundMagnet Size: D6 x 2.5 mmMagnetisation Direction: Diametral / DiametricalResidual Magnetic Flux Density (Br): 1170-1220 mT (11.7-12.2 kGs)Energy Density (BH)max: 263-287 KJ/mÂ³...

Click for more...

D8x2.5mm Diametral Disc Magnet N35H for Sensor

Magnet description:
Magnet ID:HSND-0082.5-35H
Diametral Magnet Part No.: HSND-0082.5-35HMagnetisation Grade: N35HMaterial: Sintered Neodymium-Iron-Boron (Rare Earth NdFeB)Plating / Coating: Nickel (Ni-Cu-Ni)Magnet Shape: Disc, Disk, RoundMagnet Size: D8 x 2.5 mmMagnetisation Direction: Diametral / DiametricResidual Magnetic Flux Density (Br): 1170-1220 mT (11.7-12.2 kGs)Energy Density (BH)max: 263-287 KJ/mÂ³ (33-36...

Click for more...

Thin NdFeB Axial Magnet for linear position sensor

Magnet description:
Magnet ID:HSND-00.751.5-45SH
Axial Magnet Part No.: HSND-00.751.5-45SHMagnetisation Grade: N45SHMaterial: Sintered Neodymium-Iron-Boron (Rare Earth NdFeB)Plating / Coating: Nickel (Ni-Cu-Ni)Magnet Shape: Rod, Cylinder, CylindricalMagnet Size: D0.75 x 1.50 mmMagnetisation Direction: Diametral / DiametricalResidual Magnetic Flux Density (Br): 1320-1380 mT (13.2-13.8 kGs)Energy Density (BH)max: 342-366...

Click for more...

Plastic Bonded Strontium Ferrite Multipole Ring Magnet 72 poles for Sensor

Magnet description:
Magnet ID:HS-MR12-72
Multipole Ring Magnet Part No.: HS-MR12-72Magnetisation Grade: BMNP-1612Material: Plastic bonded Strontium Ferrite SrFe.Magnet Shape: RingMagnet Size: inner diameter = 24mm, outer diameter = 32mm, thickness = 1.5mmPole Length: 1.2 mmPoles No.: 72 Poles This specification defines the dimensional and magnetic properties of a multipole magnetic ring for use with the linear...

Click for more...

Sensor Ceramic Magnetic Multipole Ring 1.0mm pole length, 128 poles

Magnet description:
Magnet ID:HS-MR10-128
Multipole Ring Magnet Part No.: HS-MR10-128Magnetisation Grade: BMNP-8LMaterial: Plastic bonded Strontium Ferrite SrFe.Magnet Shape: RingMagnet Size: inner diameter =38.5mm, outer diameter =42.5mm, thickness =1.5mmPole Length: 1.0 mmPoles No.: 128 Poles This specification defines the dimensional and magnetic properties of a multipole magnetic ring for use with the...

Click for more...

Sensor Ferrite Multipole Ring Magnet Pole Length 2.0 mm 44 Poles

Magnet description:
Magnet ID:HS-MR20-44
Multipole Ring Magnet Part No.: HS-MR20-44Magnetisation Grade: BMNP-1612Material: Plastic bonded Strontium Ferrite SrFe.Magnet Shape: RingMagnet Size: inner diameter = 24mm, outer diameter = 32mm, thickness = 1.5mmPole Length: 2.0 mmPoles No.: 44 Poles This specification defines the dimensional and magnetic properties of a multipole magnetic ring for use with the linear...

Click for more...

Li Ferrite Material Series Microwave Ferrite

Magnet description:
Magnet ID:HS-XL
Li Ferrite Material Series â€“ Microwave Ferrite and Ceramic, Lithium-Titanium-Zink Microwave Ferrite For Strip-line Isolators and Circulators Li Ferrite Microwave Ferrite â€“ Characteristics1. Low magnetic loss and dielectric loss2. Good stability of temperature3. High dielectric coefficient ApplicationsLow power loss coaxial, power electronics, strip-line...

Click for more...

Ni (Nickel Spinels) Ferrite High Power Material Series Microwave Ferrite

Magnet description:
Magnet ID:HS-Xn
Ni (Nickel Spinels) Ferrite High Power Material Series â€“ Microwave Ferrite and Ceramic, Nickel Ferrites Serie Microwave Ferrite High Power Ni Ferrite â€“ Characteristics 1. Low magnetic and dielectric loss2. Well temperature stability3. Excellent surface density and compactness Applications Coaxial, microstrip, stripline isolators and circulator Advantages We...

Click for more...

Ni Ferrite Material Series Microwave Ferrite

Magnet description:
Magnet ID:HS-XN
Ni (Nickel Spinels) Ferrite Material Series â€“ Microwave Ferrite and Ceramic, Nickel Ferrite Material Microwave Ferrite For Microstrip Isolators and Circulators Ni Ferrite Characteristics 1. Well temperature stability2. Small ferromagnetic resonance linewidth3. High spinwave widthline4. Low dielectric lossApplicationsHigh power microwave circulators, isolators and...

Click for more...

General Garnet Material Series Microwave Ferrite

Magnet description:
Magnet ID:YAIIG, YIG, BiCaVIGs
General Garnet Material Series â€“ Microwave Ferrite, Garnet & Ferrite Material (Microwave), Y-Gd (Yttrium-Gadolinium), Y-Gd-Al (Yttrium-Gadolinium-Aluminium), Y-Al (Yttrium-Aluminium), CVG (Ð¡alcium-Vanadium), Y-Gd-Al Co or Dy(Yttrium-Gadolinium-Aluminium with Co and Dy additives) Microwave Ferrite â€“ Characteristics1. Low magnetic loss and dielectric loss2....

Click for more...

Narrow Linewidth Garnet Material Series Microwave Ferrite

Magnet description:
Magnet ID:YCaGeIGs
Narrow Linewidth Garnet Material Series â€“ Microwave Ferrite, Narrow Linewidth Garnet Ferrites, Heat-resisting with narrow frequency band, Narrow Linewidth materials for above resonance applications Narrow Linewidth Garnet â€“ Characteristics1.Small ferromagnetic resonance linewidth2.Good stability of temperature3.Excellent surface density and well...

Click for more...

Magnet description:
Magnet ID:G-42
Garnets with enhanced power handling, with useful switching properties. Microwave ferrite magnets can generate constant magnetic field to control electric current so that microwave signal is amplified and information can be smoothly transmitted. Microwave magnets are widely used in magnetrons, cathode-ray tubes, isolators, circulator, etc. These electronic components are...

Click for more...

Magnet description:
Magnet ID:G-10
Gadolinum Substituted Garnets â€“ Microwave Ferrite and Ceramic, Ferrites & Magnetic Materials, Garnet & Ferrite (Microwave) Gadolinum Substituted Garnets for below resonance applications with stringent temperature requirements. HSMAG is a China manufacturer of microwave ferrite materials in the world for the wireless industry. Our products range from high...

Click for more...

Magnet description:
Magnet ID:G-
Aluminum Gadolinium Substituted Garnets for below resonance applications with moderate temperature and power handling requirements, with useful switching properties. In recent years due to success in the field of microwave electronics a lot of devices of different applications were produced. The prospects for future development of microwave systems with predetermined...

Click for more...

Magnet description:
Magnet ID:HSMF1
Microwave Ferrite â€“ Magnesium Spinels for below resonance devices requiring 4PiMs in the range 750 to 3000 Gauss, with useful switching properties. Suitable for application in devices with low magnetic and dielectric losses. Ferrite materials on the base of Mg spinel are characterised by small values of coercive field strength and also by low magnetic and dielectric...

Click for more...

Magnet description:
Magnet ID:HSMF2
Nickel Spinels for below resonance applications requiring 4PiMs in the range 500 to 5000 Gauss, with useful power handling capability. Some have useful switching properties. HangSeng Magnetech is a manufacturer of microwave ferrite materials for the wireless industry in China. Our products range from high volume garnets for wireless infrastucture to specialized...

Click for more...

Magnet description:
Magnet ID:MFVG
Narrow Linewidth Microwave Ferrite â€“ Narrow Linewidth materials for above resonance applications; G-810, G-1010, G-1210 & G-113 are all suitable for below resonance applications. HangSeng Magnetech is a manufacturer of microwave ferrite materials for the wireless industry in China. Our products range from high volume garnets for wireless infrastucture to...

Click for more...

Magnet description:
Magnet ID:LSMF-A
Lithium Spinels Microwave Ferrite â€“ A limited range of Lithium Spinels with useful switching properties, for example other compositions are available on request. HangSeng Magnetech Ferrites & Magnetic Materials include Narrow LinewidthAluminum & Aluminum Gadolinium Substituted GarnetsGadolinum Substituted GarnetsCobalt & Holmium Doped GarnetsMagnesium...

Click for more...

Plastic Cap Magnets in Ferrite, Rectangular Yellow

Magnet description:
Magnet ID:OFMB-YP100 Series
Specification:Part No.:OFMB-YP100 SeriesMaterial: PS (ABS-plastic) + Ferrite magnetSize: 11 â€“ 55 mm longShape: Rectangular / block / barColor: yellowLogo Printing: Transfer printing by Customer design These kinds of magnets are suitable for planning and organizing in warehouses or offices. Their ease of placement and low cost make them ideal for planning...

Click for more...

Rectangular Red Plastic Covered Ferrite Magnets

Magnet description:
Magnet ID:OFMB-RP100 Series
Specification:Part No.:OFMB-RP100 SeriesMaterial: PS (ABS-plastic) + Ferrite magnetSize: 11 â€“ 55 mm longShape: Rectangular / block / barColor: redLogo Printing: Transfer printing by Customer design These kinds of magnets are suitable for planning and organizing in warehouses or offices. Their ease of placement and low cost make them ideal for planning purposes,...

Click for more...

Black Rectangular Plastic Cap Magnets in Ferrite

Magnet description:
Magnet ID:OFMB-BP100 Series
Specification:Part No.:OFMB-BP100 SeriesMaterial: PS (ABS-plastic) + Ferrite magnetSize: 11 â€“ 55 mm longShape: Rectangular / block / barColor: blackLogo Printing: Transfer printing by Customer design FeaturesNew and high qualitySmall yet extra strong forceUse to hold postcards, photos, charts, posters and maps to refrigerator, washing machine, file closet, metal...

Click for more...

Green Rectangular Plastic Covered Ferrite Magnets

Magnet description:
Magnet ID:OFMB-GP100 Series
Specification:Part No.:OFMB-GP100 SeriesMaterial: PS (ABS-plastic) + Ferrite magnetSize: 11 â€“ 55 mm longShape: Rectangular / block / barColor: greenLogo Printing: Transfer printing by Customer design Magnets covered in strong plastic can be used for a wide range of applications â€“ for example planner and organisational systems., as well as for magnetic...

Click for more...

White Plastic Coated Rectangular Ceramic / Ferrite Magnet

Magnet description:
Magnet ID:OFMB-WP100 Series
Specification:Part No.:OFMB-WP100 SeriesMaterial: PS (ABS-plastic) + Ferrite magnetSize: 11 â€“ 55 mm longShape: Rectangular / block / barColor: whiteLogo Printing: Transfer printing by Customer design These kinds of magnets are suitable for planning and organizing in warehouses or offices. Their ease of placement and low cost make them ideal for planning purposes,...

Click for more...

Refrigerator Fridge Whiteboard Ferrite Magnetic Bar Blue

Magnet description:
Magnet ID:OFMB-UP100 Series
Specification:Part No.:OFMB-UP100 SeriesMaterial: PS (ABS-plastic) + Ferrite magnetSize: 11 â€“ 55 mm longShape: Rectangular / block / barColor: blueLogo Printing: Transfer printing by Customer design These kinds of magnets are suitable for planning and organizing in warehouses or offices. Their ease of placement and low cost make them ideal for planning purposes,...

Click for more...

Red and Blue Cylindrical Bar Magnets with Plastic Coating

Magnet description:
Magnet ID:ONMB80-PRB Series
Part No.: ONMB80-PRB SeriesColor: Red and BlueSize: 80 mm x 22 mm x 10 mmMaterial: Neodymium (NdFeB, NIB) + ABS PlasticMagnet Grade: N35 / N38 / N40 / N42 / N45 / N48Magnet Shape: Bar / RodPlating/Coating: Ni-Cu-Ni-Plastic (Nickel-Copper-Nickel-Plastic)Max Operating Temp: 176ÂºF (80ÂºC)Tolerances: Â±0.01 x Â±0.01 mmMagnetization Direction: Magnetized Through...

Click for more...

Red/Green Plastic Covered Ceramic Magnetic Blocks (Regular or Jumbo)

Magnet description:
Magnet ID:OFMB52-P
Available in two sizes this product is colour coded for easy identification of the magnetic poles (Green for North and Red for South). Their colour coding makes these blocks the perfect product to demonstrate the attraction of opposite magnetic poles and the repelling of like magnetic poles. The small sized block is also well suited for use with Iron filings to demonstrate...

Click for more...

Red and Blue Plastic Covered Bar Magnets

Magnet description:
Magnet ID:ONMB80-RBP Series
Part No.: ONMB80-RBP SeriesColor: Red and BlueSize: 80 mm x 15 mm x 10 mmMaterial: Neodymium (NdFeB, NIB) + ABS PlasticMagnet Grade: N35 / N38 / N40 / N42 / N45 / N48Magnet Shape: BarPlating/Coating: Ni-Cu-Ni-Plastic (Nickel-Copper-Nickel-Plastic)Max Operating Temp: 176ÂºF (80ÂºC)Tolerances: Â±0.01 x Â±0.01 mmMagnetization Direction: Magnetized Through Thickness...

Click for more...

High Power Memo Board / Whiteboard / Glassboard / Refrigerator Magnets

Magnet description:
Magnet ID:ONBM40-*P Series
Part No.: ONBM40-*P SeriesColor: Black,Blue,Green,Orange,Red,White,YellowSize:Total diameter (D): 40 mmTotal height (H): 11 mmMaterial: Neodymium (NdFeB, NIB) + ABS PlasticMagnet Grade: N42Magnet Shape: Round / DiscPlating/Coating: Ni-Cu-Ni neo magnets in plastic housingMax Operating Temp: 176ÂºF (80ÂºC)Tolerances: Â±0.01 x Â±0.01 mmMagnetization Direction: Magnetized...

Click for more...

High Powerful Notice / Planning Board Neodymium Magnets

Magnet description:
Magnet ID:ONBM30-*P Series
30mm dia x 11mm high Powerful Notice Board/Planning Neodymium Magnets, High Power Memo Board/Planning/Whiteboard/Glassboard Magnets, Strong Office Notice Board/Planning Neodymium Magnets Part No.: ONBM30-*P SeriesColor: Black,Blue,Green,Orange,Red,Silver,White,YellowSize:Total diameter (D): 30 mmTotal height (H): 11 mmMaterial: Neodymium (NdFeB, NIB) + ABS PlasticMagnet...

Click for more...

Red & Green Plastic Coated Neodymium Rare Earth Magnet

Magnet description:
Magnet ID:PCDNM-RG
Part No.: PCDNM-RB SeriesSize: 3/4 inch diameter x 1/8 inch thick disc. Size including plastic coating: 7/8 inch diameter x 1/4 inch thick. or (19.1 mm x 3.2 mm) Size including plastic coating (22.2 mm x 6.4 mm).Magnet encased inside impact resistant hard plastic shell.Material: Neodymium (NdFeB)Magnet Grade: N48 (also choose N40, N42, N45, N50)Magnet Shape: DiscColor: Red...

Click for more...

Red and Black Plastic Coating Round Neodymium Magnet

Magnet description:
Magnet ID:PCDNM-RB
Part No.: PCDNM-RB SeriesSize: 1/2â€³ diameter x 1/4â€³ thick (12.7mm x 6.35mm)Material: Neodymium (NdFeB)Magnet Grade: N33, N35, N38, N40, N42, N45, N48, N50Magnet Shape: DiscColor: a half Red and a half BlackPlating/Coating: Ni-Cu-Ni-PlasticMax Operating Temp: 176ÂºF (80ÂºC)Tolerances: Â±0.004â€³ x Â±0.004â€³Magnetization Direction: Magnetized Axial...

Click for more...

Magnet description:
Magnet ID:PCDNM-W
Part No.: PCDNM-W SeriesSize: 1/2â€³ diameter x 1/4â€³ thick (12.7mm x 6.35mm)Material: Neodymium (NdFeB)Magnet Grade: N33, N35, N38, N40, N42, N45, N48, N50Magnet Shape: DiscColor: WhitePlating/Coating: Ni-Cu-Ni-PlasticMax Operating Temp: 176ÂºF (80ÂºC)Tolerances: Â±0.004â€³ x Â±0.004â€³Magnetization Direction: Magnetized Axial Through Thickness (Poles...

Click for more...

Red Plastic Covered Round Neodymium Magnet

Magnet description:
Magnet ID:PCDNM-R
Part No.: PCDNM-R SeriesSize: 1/2â€³ diameter x 1/4â€³ thick (12.7mm x 6.35mm)Material: Neodymium (NdFeB)Magnet Grade: N33, N35, N38, N40, N42, N45, N48, N50Magnet Shape: DiscColor: RedPlating/Coating: Ni-Cu-Ni-PlasticMax Operating Temp: 176ÂºF (80ÂºC)Tolerances: Â±0.004â€³ x Â±0.004â€³Magnetization Direction: Magnetized Axial Through Thickness (Poles...

Click for more...

Blue Plastic Coated Disc Neodymium Magnet

Magnet description:
Magnet ID:PCDNM-U
Part No.: PCDNM-U SeriesSize: 1/2â€³ diameter x 1/4â€³ thick (12.7mm x 6.35mm)Material: Neodymium (NdFeB)Magnet Grade: N33, N35, N38, N40, N42, N45, N48, N50Magnet Shape: Disc, roundColor: BluePlating/Coating: Ni-Cu-Ni-PlasticMax Operating Temp: 176ÂºF (80ÂºC)Tolerances: Â±0.004â€³ x Â±0.004â€³Magnetization Direction: Magnetized Axial Through Thickness...

Click for more...

Green Plastic Coated Disc Neodymium Magnet

Magnet description:
Magnet ID:PCDNM-G
Part No.: PCDNM-G SeriesSize: 1/2â€³ diameter x 1/4â€³ thick (12.7mm x 6.35mm)Material: Neodymium (NdFeB)Magnet Grade: N33, N35, N38, N40, N42, N45, N48, N50Magnet Shape: Disc / roundColor: GreenPlating/Coating: Ni-Cu-Ni-PlasticMax Operating Temp: 176ÂºF (80ÂºC)Tolerances: Â±0.004â€³ x Â±0.004â€³Magnetization Direction: Magnetized Axial Through...

Click for more...

Plastic Coating Disc Yellow Strong Neodymium Magnet

Magnet description:
Magnet ID:PCDNM-Y
Part No.: PCDNM-Y SeriesSize: 1/2â€³ diameter x 1/4â€³ thick (12.7mm x 6.35mm)Material: Neodymium (NdFeB)Magnet Grade: N33, N35, N38, N40, N42, N45, N48, N50Magnet Shape: DiscColor: YellowPlating/Coating: Ni-Cu-Ni-PlasticMax Operating Temp: 176ÂºF (80ÂºC)Tolerances: Â±0.004â€³ x Â±0.004â€³Magnetization Direction: Magnetized Axial Through Thickness...

Click for more...

Plastic Coated Black Neodymium Disc Magnets

Magnet description:
Magnet ID:PCDNM-B
Part No.: PCDNM-B SeriesSize: 1/2â€³ diameter x 1/4â€³ thick (12.7mm x 6.35mm)Material: Neodymium (NdFeB)Magnet Grade: N33, N35, N38, N40, N42, N45, N48, N50Magnet Shape: Disc / roundColor: BlackPlating/Coating: Ni-Cu-Ni-PlasticMax Operating Temp: 176ÂºF (80ÂºC)Tolerances: Â±0.004â€³ x Â±0.004â€³Magnetization Direction: Magnetized Axial Through...

Click for more...

Polished Alnico 5 Pickup Humbucker Bar Magnet

Magnet description:
Magnet ID:HS-GPAB-10
Pro quality Alnico 5 fully magnetized polished cast bar magnet used in humbucker and P90 pickups. Bar Magnet is marked customer color to distinguish magnet grade and north orientation.In terms of magnetic strength the Alnico 5 is the strongest of the three when compared to Alnico 2 or Alnico 3. Bright, glassy tones with a punchy aggressive attack, a more tighter sound overall....

Click for more...

Vintage Rough Pickups Alnico 5 Bar Magnets

Magnet description:
Magnet ID:HS-GPAB-9
Alnico 5 magnets really are the â€œgo to guyâ€ for most of us when it comes to our first real pickups, and turn up incredibly often, on 90% of pickups out there. Tonally, they give a nicely defined voicing, often scooping the middle fairly heavily which really â€œcleansâ€ the final product, giving great definition and bite in the top end â€“ normally...

Click for more...

Unoriented Alnico 5 Rough Surface Bar Magnets

Magnet description:
Magnet ID:HS-GPAB-8
Alnico V is really the most popular magnet here. This is the most versatile magnet of them all. Prominent treble response and a strong bass response. For the longest time, this magnet was the strongest of the group. Fully magnetized â€œUn-Orientedâ€ Alnico 5 cast bar magnet. For 6 string humbuckers and P-90â€™s. One end of the magnet is painted two red lines to...

Click for more...

Unpolished Rough Sand Cast Alnico 8 Bar Humbucker Magnets

Magnet description:
Magnet ID:HS-GPAB-7
* Permanent Magnet Merial:AlNiCo 8 / Alnico VIII/ A8* Size:2.5â€³ Length x 0.5â€³ Width x 0.125â€³ Heightor 2.18â€³ Length x 0.5â€³ Width x 0.125â€³ Heightor 2.444â€³ Length x 0.492â€³ Width x 0.125â€³ Height* Polished: Unpolished â€“ Vintage Rough Cast or Sand Cast, Vintage PAF* For humbucker and P90 pickups* A8 â€“ one end...

Click for more...

Rough Cast or Vingate PAF Alnico Bar Magnets

Magnet description:
Magnet ID:HS-GPAB-6
* Permanent Magnet Merial:AlNiCo 2/ Alnico 3/ Alnico 4 / Alnico 5 /Alnico 8* Size:2.5â€³ Length x 0.5â€³ Width x 0.125â€³ Heightor 2.18â€³ Length x 0.5â€³ Width x 0.125â€³ Heightor 2.444â€³ Length x 0.492â€³ Width x 0.125â€³ Height* Polished: Unpolished â€“ Vintage Rough Cast or Sand Cast, Vintage PAF* For humbucker and P90 pickups*...

Click for more...

Polished Guitar Pickup Alnico Bar Humbucker Magnets

Magnet description:
Magnet ID:HS-GPAB-5
* Permanent Magnet Merial:AlNiCo 2/ Alnico 3/ Alnico 4 / Alnico 5 /Alnico 8* Size:2.5â€³ Length x 0.5â€³ Width x 0.125â€³ Heightor 2.18â€³ Length x 0.5â€³ Width x 0.125â€³ Heightor 2.444â€³ Length x 0.492â€³ Width x 0.125â€³ Height* Polished: WITH Polished* For humbucker and P90 pickups* A2/A3/A4/A5/A8 â€“ one end painted colour...

Click for more...

Magnet Spacers for Humbucker or P90 Pickup

Magnet description:
Magnet ID:HS-GPAB-4
* Permanent Magnet Merial:AlNiCo 2/ Alnico 3/ Alnico 4 / Alnico 5 /Alnico 8 / Ceramic C8* Size: 60mm x 3.2 mm x 5mm (approx)* Polished: Polished or Unpolished* For humbucker and P90 pickups* A2/A3/A4/A5/A8 â€“ one end painted colour (customer choose blue/red/green/black -.) for easy identification* Magnetizing Options:Not Magnetized or Magnetized Magnetic spacers...

Click for more...

AlNiCo Bar Permanent Magnet for Firebird Mini Humbucker Pickup

Magnet description:
Magnet ID:HS-GPAB-3
Permanent Bar Magnet for Firebird Mini Humbucker, Alnico Bar Magnet for Firebird Mini Humbucker Pickup, Mini Humbucker Pickups Fully Magnetized Alnico Bar Magnet * Permanent Magnet Merial:AlNiCo 2/ Alnico 3/ Alnico 4 / Alnico 5 /Alnico 8* Size: 2-3/32â€³ x 5/16â€³ x 1/8â€³(53.18mm x 7.98mm x 3.18mm) (approx)* Polished: Polished or Unpolished (rough cast,...

Click for more...

Mini Humbucker Pickups Fully Magnetized Alnico Bar Magnet

Magnet description:
Magnet ID:HS-GPAB-2
* Permanent Magnet Merial:AlNiCo 2/ Alnico 3/ Alnico 4 / Alnico 5 /Alnico 8* Size: 2-3/32â€³ x 5/16â€³ x 1/8â€³(53.18mm x 7.98mm x 3.18mm) (approx)* Polished: Polished or Unpolished (rough cast, sand cast)* For humbucker and P90 pickups* A2/A3/A4/A5/A8 â€“ one end painted colour (customer choose blue/red/green/black -.) for easy identification*...

Click for more...

Magnet description:
Magnet ID:HS-GPAB-1
* Permanent Magnet Merial:AlNiCo 2/ Alnico 3/ Alnico 4 / Alnico 5 /Alnico 8* Size: 2-3/32â€³ x 5/16â€³ x 1/8â€³(53.18mm x 7.98mm x 3.18mm) (approx)* Polished: Polished or Unpolished (rough cast, sand cast)* For humbucker and P90 pickups* A2/A3/A4/A5/A8 â€“ one end painted colour (customer choose blue/red/green/black -.) for easy identification*...

Click for more...

Ceramic C8 Bar Magnets for Guitar Humbucker / P90 Pickup

Magnet description:
Magnet ID:HS-GPCB
* Permanent Magnet Merial: Ceramic 8 / C8 / Ferrite* Size: 2.18â€ Long,2.3â€ Long,2.35â€ Long,2.6â€ Long, 2.625â€ Long,2.95â€ Long,3.125â€ Long,3.125â€ Long,3.33â€ Long* Polished: Polished /Ground* For humbucker and P90 pickups, 7-8 string humbuckers* Can provide one end painted colour (customer choose blue/red/green/black -.)...

Click for more...

Magnet description:
Magnet ID:HS-GPCB
* Permanent Magnet Merial:Ceramic 8 / C8 / Ferrite* Size: 2.18â€ Long,2.3â€ Long,2.35â€ Long,2.6â€ Long, 2.625â€ Long,2.95â€ Long,3.125â€ Long,3.125â€ Long,3.33â€ Long* Polished: Polished /Ground* For humbucker and P90 pickups, 7-8 string humbuckers* Can provide C8 one end painted colour (customer choose blue/red/green/black...

Click for more...

Magnet description:
Magnet ID:HS-GPCB
* Permanent Magnet Merial:Ceramic 8 / C8 / Ferrite* Size: 2.18â€ Long,2.3â€ Long,2.35â€ Long,2.6â€ Long, 2.625â€ Long,2.95â€ Long,3.125â€ Long,3.125â€ Long,3.33â€ Long* Polished: Polished /Ground* For humbucker and P90 pickups, 7-8 string humbuckers* Can provide one end painted colour (customer choose blue/red/green/black -.)...

Click for more...

Magnet description:
Magnet ID:HDD-5
Neodymium rare earth hard drive magnets made by HS Magnets are composed of top quality Neodymium, Iron, Boron raw materials, they have excellent magnetic property and extremely strong for its size. Neodymium rare earth magnets are the strongest types of permanent magnets. They have highest maximum energy product among all permanent magnets. All of our rare earth magnets are...

Click for more...

Hard Disk Head Actuator NdFeB Magnetic Aassembly

Magnet description:
Magnet ID:HDD-4
Hard Drive magnets account for 10% of all the neodymium produced and over 1 million Hard Drives are manufactured every day. It is estimated that over 12 billion have been manufactured to-date.When Hard Drives fail or come to the end of their lives the common practice in Data Centres is to have them shredded and disposed of. Shredding destroys the valuable magnets which cannot...

Click for more...

Hard Disk Actuator Magnet
inquiry

Magnet description:
Magnet ID:HDD-3
The hard disk platters are accessed for read and write operations using the read/write heads mounted on the top and bottom surfaces of each platter. Obviously, the read/write heads donâ€™t just float in space; they must be held in an exact position relative to the surfaces they are reading, and furthermore, they must be moved from track to track to allow access to the...

Click for more...

Hard Disk Drive Permanent Magnet Assembly

Magnet description:
Magnet ID:HDD-2
We can supply any size and shape hard drive magnets assembly (neodymium or ferrite) for customerâ€™s design drawing. Please send your products design to us, we can the best magnetic solution for your plan. A neodymium magnet (also known as NdFeB, NIB, or Neo magnet), the most widely-used type of rare-earth magnet, is a permanent magnet made from an alloy of neodymium,...

Click for more...

Hard Drive Magnet Assembly
inquiry

Magnet description:
Magnet ID:HDD-1
We can supply any size and shape hard drive magnets (neodymium or ferrite) for customerâ€™s design drawing. Please send your products design to us, we can the best magnetic solution for your plan. There are only a few naturally-occurring materials that are magnetic by themselves, without electricity being applied to them to make them into electromagnets. One of them is...

Click for more...

Magnetic Pulley
inquiry

Magnet description:
Magnet ID:MPUY-6
Magnetic pulleys always are placed at the head of conveyor belt to separate iron particle, iron scrap, tramp iron and other ferromagnetic objects from more bulk dry material flow such as iron ore, grain, sand, gravel, plastics, wood, waste, cullet, rubber, etc. Features:1.Can be produced with cost saving ferrite magnets, also can be produced with powerful rare earth magnets...

Click for more...

Permanent Magnetic Pulleys
inquiry

Magnet description:
Magnet ID:MPUY-5
We are engaged in offering our valuable customers Permanent Magnetic Pulley. These are utilized for the removal of scrap metal from a flow of materials. The magnets utilized are bipolar and are covered with steel/aluminium shell. The field intensity of the magnet is spread across the entire surface. These are made available in varying diameters to suit the specifications of...

Click for more...

Magnetic Head Pulley
inquiry

Magnet description:
Magnet ID:MPUY-4
Magnetic head pulleys are used in conveyor belts for separating medium-sized ferrous parts from bulk goods. They attract tramp iron from these bulk materials in the same space as the normal conveyor belt head pulley. When the belt separates from the pulley on the return, the ferrous is pulled from the field into a separate pile. For special applications, extremely strong...

Click for more...

Magnetic Pulley Separator
inquiry

Magnet description:
Magnet ID:MPUY-3
HSMAG manufacture a wide range of Rare Earth and Ferrite Magnetic Pulleys. These Pulleys are widely used to remove tramp iron mixed with the material moving on a conveyor belt.The Magnet pulleys are always installed at the discharge point of the conveyor to separate tramp iron from the product moving on the conveyor belt. Magnetic head pulleys are ideal products for remove...

Click for more...

Magnetic Drum Pulley
inquiry

Magnet description:
Magnet ID:MPUY-2
The operating principle of Magnetic Pulley is similar to Magnetic Drum, which is also designed for continuous self-cleaning of metal. It is generally installed at the end of conveyor belt to separate the iron contaminant from material.When product is conveyed along the belt to the head pulley and enters the magnetic field where metal contaminants are attracted and held tightly...

Click for more...

Magnetic Head Roller
inquiry

Magnet description:
Magnet ID:MPUY-1
Magnetic Head Roller are important magnetic products which are used as head pulleys in belt conveyors for removing ferrous contaminants from material flow. Magnetic rollers cover with stainless steel (SS304 or SS316) full strong magnets design which up to 15000GS, permanent magnetic roller Ferrite System and Rare Earth System Available , easy install, long service...

Click for more...

Permanent Magnetic Drum
inquiry

Magnet description:
Magnet ID:HS-MSDM
Permanent Drum type Magnetic Separator is most useful for separating tramp iron from non magnetic material processed in bulk quantity, for the purity of end products, recovery of metal having commercial value and protection of processing plant and machinery. These are widely used in all the processing industry for separation of iron contamination from Minerals, Chemicals,...

Click for more...

Magnetic Drum Separators
inquiry

Magnet description:
Magnet ID:HS-MSDM
Ceramic-8A and Rare Earth-Neodymium Magnet MaterialMagnetic drum separators efficiently and completely separate iron-based material from dry, bulk products. Using a free-flowing processing system, plastic, non-magnetic metals and other materials move through a stainless-steel drum while the magnetic separator consolidates any residual iron-based metals. The metals adhere to...

Click for more...

Magnetic Drum Roller
inquiry

Magnet description:
Magnet ID:HS-MSDM
We are offering our clients with Drum Magnet Systems that are manufactured using high grade raw material and latest technology. Our automatic systems have the capability to cover a magnetic field of over 180Â° at the time of separating ferromagnetic impurities from bulk material. In addition to this, our products are widely acclaimed by the customers due to their longer...

Click for more...

Half Magnetic Drum
inquiry

Magnet description:
Magnet ID:HS-MSDM
Half Magnetic Drum, also named half magnetic roller, has a half disc(180 degree) stationary magnetic section that is covered by a revolving round stainless steel shell with rotation axis. It can form an automated separating system together with electric driver motor. As one kind of drum magnets, the Half Magnetic Drums consists of a revolving round stainless steel shell,...

Click for more...

Magnet description:
Magnet ID:MSNMP / MSFMP
These units are designed to be positioned on the underside of angled chutes, product drop off points or opposite each other to form a housed chute magnet. Applications:These units are designed to be positioned on the underside of angled chutes, product drop off points or opposite each other to form a housed chute magnet. This allows the product to flow across or close to the...

Click for more...

Plate Magnets
inquiry

Magnet description:
Magnet ID:MSMP
Plate Magnets are used to remove ferrous fines, as well as large pieces of tramp iron, from many types of free-flowing and pneumatically conveyed material. Bunting Plate Magnets are easily installed in enclosed flow lines. Plate Magnets handle powdery, moist, lumpy, and abrasive products and large debris that might choke, bridge, or cause rapid wear in magnetic cartridge...

Click for more...

Magnetic Chute (Hammer Mill Plate Magnet)

Magnet description:
Magnet ID:MSMP-MC
Chute Magnet extracts Tramp Iron from chopped sugar cane during processing to ensure that crushing rolls are not damages and that crushing rolls are not damages and that the finished product is free from ferrous contamination. Chute Magnet as a advance model of Plate Magnet. It is a stationary Magnet which is simple to install, operate and maintain, and so has proved to be the...

Click for more...

Magnet description:
Magnet ID:MSNMP-OPM / MSFMP-OPM
Overhead plate magnets are designed to remove ferrous contamination from conveyed product Applications:Overhead plate magnets are designed to remove ferrous contamination from conveyed product on a conveyor belt or open chutes, helping with product purity, reducing damage to expensive machinery and minimising costly down time. Ideal for quarries, recycling, plastics &...

Click for more...

Suspension Magnet
inquiry

Magnet description:
Magnet ID:MSMP-SPM
Suspended Permanent Magnets are designed for high separation performance in over-the- belt conveyor applications. These heavy duty permanent magnets incorporation all welded construction are particularly effective in removing tramp metal in high volume applications. Produces strong magnetic field attraction. The separator body adopts rare earth permanent magnetic materials...

Click for more...

Magnet description:
Magnet ID:MSNMP-SM / MSFMP-SM
Tapered Step Face Plate Magnets feature a diverter to provide maximum tramp metal separation and superior wash-off protection for high volume, below-the-flow applications. The diverter protects collected metal from being washed back into the product flow, while preventing product degradation. Several strengths are available in Ceramic and Rare Earth designs to meet the...

Click for more...

Suspended Plate Magnet
inquiry

Magnet description:
Magnet ID:MSMP-SPM
Suspended Plate Magnets are designed for effective tramp metals extraction from the high volume material by installation above Conveyors. Using big size ferrite or Ndfeb and properly designed configuration ensure the tramp iron can be taken from thick layer material flow by heavy duty plate. For fine metal powders in thin layer material flow, light duty plate made of rare...

Click for more...

Spout Plate Magnets
inquiry

Magnet description:
Magnet ID:MSNMP-SM
Spout Plate Magnets feature a diverter to provide maximum tramp metal separation and superior wash-off protection for high volume, below-the-flow applications. The diverter protects collected metal from being washed back into the product flow, while preventing product degradation. Several strengths are available in Ceramic and Rare Earth designs to meet the requirements of...

Click for more...

Exposed Pole Plate Magnet
inquiry

Magnet description:
Magnet ID:MSNMP-EP
Exposed Plate Magnets are designed for removing tramp metals from the low volume materials flow. They will be installed below the materials flow in the process line. Exposed Pole Magnet â€“ recommended for placing beneath the product flow so the product contacts the magnet face. Pole pieces provide maximum magnetic strength at the face to hold attracted material...

Click for more...

Flush Face Plate Magnets
inquiry

Magnet description:
Magnet ID:MSFMP-FF
Flush Face Plate Magnets have ideal metal sepration performance when assembled over the flow chute or belt applications with low-density product flows. Downstream processing facilities will be under continuous magnetic protection because plate magnets can lift ferrous tramps out of the product flow stream. Plate magnet can remove tramp iron such as Bolts, Nuts, Bits of Wire,...

Click for more...

Magnetic Pads with Rubber Coat and 2 Holes

Magnet description:
Magnet ID:MagPad-8
Magnetic Pads (commonly known as â€˜MagPadsâ€™) are used for securing objects to magnetic surfaces. The pad comes with an thread stud with locking nut which is ready to fix. They are the preferred choice for applications involving fixing roof signs to vehicles and signs to steel surfaces. These magnets are designed to give a extremely high resistance to shear forces,...

Click for more...

Magnet description:
Magnet ID:MagPad-7
Rubber coatingThe magnet on a through hole magnetic mounting pad has a rubber coating to prevent it from scratching the non-ferromagnetic material it is attached to.It also increases the amount of surface friction. The increased surface friction helps the magnet to grip the surface of the non-ferromagnetic material. This means it can hold larger objects than a standard magnet,...

Click for more...

Magnet description:
Magnet ID:MagPad-6
A through hole magnetic mounting pad has one large rectangular bar magnet on its base.This magnet has only one magnetic face, magnetised in the form of a multi-pole magnet.This is where the magnetic face is magnetised in a striped pattern of alternating north and south poles e.g. north, south, north, south. The through hole magnetic mounting pad requires multi-pole...

Click for more...

Through Hole Magnetic Mounting Pad Rubber Coated

Magnet description:
Magnet ID:MagPad-5
Magnetic Pads (commonly known as â€˜MagPadsâ€™) are used for securing objects to magnetic surfaces. The pad comes with an thread stud with locking nut which is ready to fix. They are the preferred choice for applications involving fixing roof signs to vehicles and signs to steel surfaces. These magnets are designed to give a extremely high resistance to shear forces,...

Click for more...

Magnet description:
Magnet ID:MagPad-4
Magnetic Pads (commonly known as â€˜MagPadsâ€™) are used for securing objects to magnetic surfaces. The pad comes with an thread stud with locking nut which is ready to fix. They are the preferred choice for applications involving fixing roof signs to vehicles and signs to steel surfaces. These magnets are designed to give a extremely high resistance to shear forces,...

Click for more...

Magnet description:
Magnet ID:MagPad-3
Magnetised with a six-pole striped magnetic field on the magnetic padForm: Rubber covered magnets | zinc platedMaterial: Ferrite magnets assembled on to a mild steel backing plate with a protective rubber coating over the magnets.Ferrite Grade Y30BH / Y35 / Y33 -Housing Galvanized steelRubber coated to increase friction and reduce...

Click for more...

Extra Strong Magpad Magnet with Rubber Coated

Magnet description:
Magnet ID:MagPad-2
Rubber coating on a threaded stud or through hole magnetic mounting pad, Magnetic mounting pads have a high shear strength due to their rubber coating, Magnetic mounting pads are predominantly used for advertising, as the adverts can be easily changed.magpadThis is because they can securely hold the sign for an extended period of time, but because of the magnetic capabilities,...

Click for more...

Magnet description:
Magnet ID:MagPad-1
Magnetic Pads (commonly known as â€˜MagPadsâ€™) are used for securing objects to magnetic surfaces. The pad comes with an thread stud with locking nut which is ready to fix. They are the preferred choice for applications involving fixing roof signs to vehicles and signs to steel surfaces. These magnets are designed to give a extremely high resistance to shear forces,...

Click for more...

Magnet description:
Magnet ID:Inner Rotor DZ Series
Internal RotorMaterial: Stainless Steel / Brass / Aluminum / Steel -Size(ODxH): Î¦1 â€“ Î¦260mm (customized size)Magnet Material: NdFeB / Alnico / Ferrite / SmCo -Magnet Poles Number: abouve 2 Features:magnetic torque transmission, clean and efficientbig transmission torque, small sizestable property ,wear free, long life timeApplication: PM Motor, BLDC Motor,...

Click for more...

Magnet description:
Magnet ID:Stator â€“ DK Series
Stator Features:House (Housing) Material: Stainless Steel / Brass / Aluminum / Steel -Size(ODxIDxH): abouve Î¦1 (customized size)Magnet Material: NdFeB / Alnico / Ferrite / SmCo -Magnet Poles Number: abouve 2 Magnetic stator mainly used for industrial automatic equipment, PM Motor, BLDC Motor, permanent magnet Synchronous Motor, AC Motor, D/C motor, shaft-currency...

Click for more...

Magnet description:
Magnet ID:Outer Rotor DK Series
Material: Stainless Steel / Brass / Aluminum / Steel -Size(ODxIDxH): abouve Î¦1mm (customized size)Magnet Material: NdFeB / Alnico / Ferrite / SmCo -Magnet Poles Number: abouve 2 External Rotor Features:magnetic torque transmission, clean and efficientbig transmission torque, small sizestable property ,wear free, long life timeApplication: PM Motor, BLDC Motor,...

Click for more...

Magnet description:
Magnet ID:MMP-4
With the rich experience of strong permanent magnets and itâ€™s assemblies, HSMAG dedicates itself in the R&D and mass production of big permanent magnetic assembly systems for wind turbine components. Wind turbines were typically equipped with asynchronous generators requiring to multiply the speed of rotor in order to produce the desired electrical power....

Click for more...

Magnet description:
Magnet ID:MMP-3
Linear motors are a special class of synchronous brushless servo motors. They work like torque motors, but are opened up and rolled out flat. Through the electromagnetic interaction between a coil assembly (primary part) and a permanent magnet assembly (secondary part), the electrical energy is converted to linear mechanical energy with a high level of efficiency. Other common...

Click for more...

Magnet description:
Magnet ID:MMP-2
linear motor magnetic track can generate smooth and stable magnetic force although applied voltage fluctuation.It has merits of simple structure, non-contacting, non-wearing, low noise, quick speed, high positioning precision and flexible assembly . Feature:1.U shaped linear motor magnetic track consist of four components as left plate, right plate, permanent magnets and...

Click for more...

Magnetic Linear Systems
inquiry

Magnet description:
Magnet ID:MMP-1
The offer of the magnetic tracks presented here establishes the basis for the assembly of highly efficient linear motors. Here an array of NdFeBâ€“magnets are fastened onto a soft iron structure. The complete unit will then be inserted as a fixed stator for a linear motor. Magnetic linear system is the basic component for linear motors and it works as a fixed...

Click for more...

Hump Magnet Separators
inquiry

Magnet description:
Magnet ID:HM-05
There are Ferrite hump magnet and NdFeB Hump magnet available.custom size and shaple available also. Magnetic Humps are used where the flow of material is vertical. The material falling strikes directly on the first magnet changes direction and falls over the second magnet, ensuring clean outflow of material. The Magnets are of hinged type and can be easily opened for...

Click for more...

Magnet description:
Magnet ID:HM-04
Hump Magnets or 90Â° Elbow Magnetic Separators generally consist of two Plate Magnets (made from ferrite / ceramic magnet) mounted in an offset housing and are installed in vertical spouts. They can extracting various ferrous contamination from gravity flow materials or pneumatic products flow in enclosed flow lines to protect process equipment from...

Click for more...

Magnet description:
Magnet ID:HM-03
The rare earth neodymium hump system is used to remove small to large ferrous contamination from enclosed flow lines. Applications:The hump system is used to remove small to large ferrous contamination from enclosed flow lines for product purity before the product reaches storage bins or processing equipment helping to eliminate damage to expensive machinery. Features:1....

Click for more...

Magnet description:
Magnet ID:HM-02
The Permanent Magnetic Hump, is an in-line magnet for extracting fine ferrous metals from pneumatic conveyor systems. The leak-proof stainless steel hump contains two powerful magnetic plates positioned at right angles to each other. Materials or products passing through the conveyor system are evenly distributed through the hump and across the magnets with little turbulence...

Click for more...

Half-Hump Magnets
inquiry

Magnet description:
Magnet ID:HM-01
Usually, Half-Hump Magnet is used where Hump Magnets doesnâ€™t fit due to height restriction. Ideal for ferrous tramp metal separation in gravity systems, Hump Magnet separators are adaptable to either round pipe or rectangular chute transfer lines.The Hump magnet employs two heavy duty diverter-equipped Spout Magnets, which are positioned so that the offset flow of...

Click for more...

Bullet Magnet
inquiry

Magnet description:
Magnet ID:HS-MSBM-10
Bullet Magnet INTRODUCTIONHSMAGâ€™s aerodynamically shaped with a solid stainless steel nose cone, the flow through design of the Bullet Magnet allows the magnet to be used anywhere in a pneumatic line system. It can be used ahead of processing equipment and bulk load out to assure product purity and protect machinery from tramp metal damage. The nose cone diverter and...

Click for more...

Bullet Magnetic Separators
inquiry

Magnet description:
Magnet ID:HS-MSBM-9
Food Grade Magnetic BulletBullet Magnets for dry free-flowing productsHSMAG all stainless steel, bullet-shaped, magnetic separators are designed for pneumatic or gravity flow conveying lines where metal trash is best separated from product flow by tapered poles created by a bullet-shaped cartridge. Powerful, rare-earth, neodymium magnets capture and hold iron, steel, or nickel...

Click for more...

Pipe Magnet Separators
inquiry

Magnet description:
Magnet ID:HS-MSBM-8
Bullet Magnet Separator consists of a powerful core magnet whose shape likes bullet and round stainless housed with a door. The bullet magnet is attached on the door due to the special design. It is very easy to clean by quickly releasing the catches and opening door and a efficient device for removing ferrous tramp metal (such as nails, nuts, bolts, etc) from dry powder in...

Click for more...

Magnet description:
Magnet ID:HS-MSBM-7
Bullet magnets are an efficient device for extracting small & large ferrous contamination Applications:Bullet magnets are an efficient device for extracting small ferrous particles as well as large pieces of contamination from gravity or air blown pipelines for products such as flour, sugar, salt etc. Features:1. The cone shaped bullet tip ensures optimum product...

Click for more...

Bullet Magnetic Separators
inquiry

Magnet description:
Magnet ID:HS-MSBM-6
Bullet separator is designed for installation in pipelines or ducted systems, to trap the ferrous particles from the powder, grain material flows over the magnetic bullet .Open the door to remove the ferrous particles on the surface of the magnetic core. Bullet Magnets & Pipe MagnetsBullet magnetic separators are typically installed into pipelines and gravity feed...

Click for more...

Housed Bullet Magnets
inquiry

Magnet description:
Magnet ID:HS-MSBM-5
The most effective separation system in terms of price/quality. With powerful ferrite magnet core. Manual cleaning.Suitable for industry: Cattle / animal feeds Ceramic Food Minerals (fine) Plastic / rubber Recycling Seeds DesignPermanent pipe magnets are built with a large, cylindrical permanent magnet core, with a powerful, deeply penetrating magnetic field. The...

Click for more...

Magnet description:
Magnet ID:HS-MSBM-4
Neodymium-Iron-Boron Bullet Magnets/Pipe magnets can be used to filter undesired ferromagnetic (Fe) particles â€“ such as iron and steel â€“ out of granulates, fibres and coarser materials in high capacity free-fall lines. They are used in the bulk, animal feed, plastics, ceramics and recycling industries, among others. Pipe magnets are not suitable for food-related...

Click for more...

Ferrite Bullet Magnets
inquiry

Magnet description:
Magnet ID:HS-MSBM-3
Bullet magnets is widely used Ceramic processing plants include Food manufacturing and processing plants, Powder handling, Wood recycling, Plastic processing, Grain milling processing.Standard Features:â€¢ 100% Stainless Steel constructionâ€¢ Easy access for inspection and maintenanceâ€¢ Rare Earth Magnetic elementâ€¢ Units available for horizontal or vertical...

Click for more...

Bullet Magnets
inquiry

Magnet description:
Magnet ID:HS-MSBM-2
100% Stainless Steel construction with magnetic force 3000-15000gs ,Custom made avaiable. It consists of a powerful core magnet whose shape like bullet and round stainless house with a door. Because special design that the Bullet magnets is attached on the door, Bullet magnets is very easy cleaning by quickly releasing the catches and opening door. It is efficient device for...

Click for more...

Magnetic Bullet
inquiry

Magnet description:
Magnet ID:HS-MSBM-1
1. The nose cone designed like bullet ensure magnetic field optimum contact with the product flow.2. Cone magnetic strength can be chosen from 3000Gs to 15000Gs,ensure any ferrous particles are securely held in position until cleaned.3. Designed for quick and easy cleaning- open the cover, clean the magnet.4. Special requirement can be custom made. Applications :Bullet Magnet...

Click for more...

Neodymium Iron Boron DC Motor Permanent Magnets

Magnet description:
Magnet ID:DMM-15
Ndfeb Magnets (rare earth)Neodymium iron boron (rare earth) is the highest strength magnet material available. Use where space is it a premium or a very high level of magnetism is required.The material itself is brittle and has poor corrosion resistance. To counter this it is usually coated or supplied as a magnetic assembly (the magnet material is contained in a metal 'pot' -...

Click for more...

Magnet description:
Magnet ID:DMM-14
Sintered neodymium iron-boron (NdFeB) magnets are the most powerful commercially available magnets in the world. With energy products between 26 and 52 MGOe, they are the perfect solution to a host of magnetic applications demanding very strong, highly coercive magnets that are available in large quantities at a relatively low cost.Due to their impressive properties, their...

Click for more...

Magnet description:
Magnet ID:DMM-13
Neodymium (rare earth) magnetic closures add a high end feel while providing a solution that is simple to integrate, easy to open and close, reliable, predictable, performance without wear. Flexible features at an economical cost. HSMAG Magnet has partnered on projects incorporating magnets such as:â€¢Specialty marketing materials â€¢High-end ownerâ€™s manuals...

Click for more...

Magnet description:
Magnet ID:DMM-12
Rare Earth Magnets Neodymium Magnets The combination of cost and performance for magnets constructed from Neodymium makes them a popular choice for traditional magnet uses and creates new product applications. Additionally, the dramatic increase in available strength allows a much smaller magnet to be used which is favorable for most designs. Rare Earth Neodymium...

Click for more...

Magnet description:
Magnet ID:HS-F600*2
Handy assembly for holding, lifting, positioning, retrieving, and more1. Neodymium round base magnets also called Pot mangets, Cup magnets, Mounting Magnets, Magnetic Holders or Magnet Hooks, are made of permanent magnet encased in a metal pot, and feature a hole, thread, boss or removable hook in centre of the magnets. The pot is an essential part of the magnetic circuit. the...

Click for more...

Magnet description:
Magnet ID:HS-F400*2
Search magnet in recent times has become a popular fixture among hunters.The search engine uses the search neodymium magnet to locate and pick up metal objects from the bottom of reservoirs, wells, mines and other depths. Magnets allow lift even very heavy objects.Search the magnet is neodymium magnet enclosed in a steel housing which reliably protects the magnet from external...

Click for more...

Magnet description:
Magnet ID:HS-F300*2
Advantages of Search Neodymium Permanent Magnet:Hold things quite strong when contacting another magnet or plain iron, very difficult to pull away (easy to slide however).Pretty strong hold between two of these even with a couple of mm in between.Good for attaching thick stacks of paper to fridges etc or pinching together papers or textiles.They are indeed extremely...

Click for more...

Magnet description:
Magnet ID:HS-F200*2
This ia two sided permanent Treasure Salvage Magnet.Lost any KEYS or a Weapon down a drain or overboard on a boat ! great for finding them. Treasure Hunting etc. All you will need is a STRONG rope.Features:Treasure Salvage strong magnet was made of NdFeB with Tings, appearance does not rust, usually placed in room temperature, the maximum operating...

Click for more...

Magnet description:
Magnet ID:HS-F120*2
Two-sides Search magnets that can pick up and buy through our online store have two magnetic surfaces than favorably with those of unilateral patterns. They have found their application in the search for metallic structures in the most difficult conditions, allowing in any case to itself primagnitit metal. To do this, double-sided models are supplied with two eyebolts to bind...

Click for more...

Magnet description:
Magnet ID:HS-F100*2
Neodymium Search MagnetsSearch magnets which look like pot magnets, are also made up of neodymium magnets, rubber and steel housings and other components. But their sizes are usually larger than pot magnets, and, the machining method of their steel housing is different from pot magnetsâ€™. Search magnets are used for searching ferrite things in river, sea, or other...

Click for more...

Strong One-Side Retrieving Search Magnet

Magnet description:
Magnet ID:HS-F600
Neodymium Pot magnet with Threaded Stud. Complete with EYEBOLT. This magnet has been specifically developed to lift weights up to 300 kg where contact is uninterrupted. It will also lift heavy tools on which there is reasonable contact and even corroded ferrous objects such as guns and swords lying in mud. The strong Neodymium magnet is encased in steel which concentrates...

Click for more...

Magnet description:
Magnet ID:HS-F400
search magnets have a magnetic side attracts metal objects. Their application is under water searching metal various crevices and they are used for screening of soil in order to find any metallic inclusions and to find ancient coins. As the feedback from professional searchers, neodymium alloy really work wonders, removing the light ever lost objects. In order to detach...

Click for more...

One-Side Search Magnet
inquiry

Magnet description:
Magnet ID:HS-F300
Search magnet (300 kg)Cardboard box with a thick layer of foam on the bottomTwo eyebolts* The maximum force of separation is achieved only on a clean, polished, steel surface.We suggest you buy search magnet for a great price.There are discounts for buying from 2 magnets, as well as delivery by mail in Belarus.Have time to order the old price as long as the seasonal...

Click for more...

One-Way Search Magnet
inquiry

Magnet description:
Magnet ID:HS-F200
Place of applicationsearch for finds of iron at the bottom of rivers and reservoirsin cellars and cavesin wells and cellarsland in the dumpsunder bridges and crossings on the siteland clearing debris from the ironcollecting modern coins from the water (many coin magnets!)rise drowned valuable items (fishing gear, hunting rifles, etc.)The design of the search of the...

Click for more...

Strong Search Magnet
inquiry

Magnet description:
Magnet ID:HS-F120
Great for targeted search and lifting heavy objects (in particular with the silted areas), as well as to search for metal objects in a variety of situations. Powerful tool for finding artifacts in the water. Be careful when you hold the magnet in one hand and the eye bolt to another, and hold to spin. The force of attraction is such that even a very strong person is not...

Click for more...

Search Magnet
inquiry

Magnet description:
Magnet ID:HS-F100
Search magnets which look like pot magnets, are also made up of neodymium magnets, rubber and steel housings and other components. But their sizes are usually larger than pot magnets, and, the machining method of their steel housing is different from pot magnetsâ€™. Search magnets are used for searching ferrite things in river, sea, or other places. Descriptions:â—†...

Click for more...

Huge NdFeB Block
inquiry

Magnet description:
Magnet ID:NB-10010010-N52-Ni
Magnetisation Grade: N52Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NB-10010010-N52-Ni Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy ...

Click for more...

Magnet description:
Magnet ID:NB-1206020-N35SH-Ni
Magnetisation Grade: N35SHMaterial: Neodymium-Iron-Boron (NdFeB) Magnet ID: NB-1206020-N35SH-Ni Plating / Coating: Nickel (Ni-Cu-Ni) Shape: Block, Rectangle,...

Click for more...

Magnet description:
Magnet ID:NB-12012020-N38-Ni
Magnetisation Grade: N38Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NB-12012020-N38-Ni Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy ...

Click for more...

Cheap Magnetic Ball Joints
inquiry

Magnet description:
Magnet ID:HS-KD725
Magnetic Ball Joints Magnetic Ball Joints is a holding Device which has flexible joints with a diameter 10mm steel ball held by powerful rare earth magnets contained in the magnet cylinder. And the magnetic ball joints allow the steel ball a full 360Â°rotation on a 180Â°axis. This caused even if the ball comes off from the magnet cylinder, no damage can be made and...

Click for more...

Magnet description:
Magnet ID:HS-KD625
Magnetic ball joints, magnetic pole position, ballJoint Magnetic ball through the magnet and the ball joint binding, the principle is the use of magnetic spheres do adsorption position rotates to use. Thus, the movable range of the ball will be greatly wide, can be rotated 180 Â°. Junction of the magnet and the ball is spherical ball combination can not scratch. You can also...

Click for more...

NdFeB Magnetic Ball Joints
inquiry

Magnet description:
Magnet ID:HS-KD516
Magnetic ball jointsSteel ball magnetically held in spherical socket The steel ball is subject to a magnetic field in the permanent magnetic system and is thus held in the spherical socket by this magnetic force. This results in a joint which can be turned in any direction with an angle up to 180Â°. If the holding force of the magnet system is exceeded, the ball is released...

Click for more...

Magnet description:
Magnet ID:HS-KD418
Made with powerful NdFeB magnetSuitable for use in exhibition stands or truss display systemsBody made of brass with tapped hold to mount on any surfaceCan hold anything within stipulated load at any angleAllows the steel ball to rotate a full 360 degrees on a 180-degree axisThisMagnetic universal Joints isa holding device that has flexible joints with a 10 mm diameter steel...

Click for more...

China Magnetic Ball Joints
inquiry

Magnet description:
Magnet ID:HS-KD413
Permanent NdFeB Magnetic Ball Joint AssemblyA holding device used for cameras, light fixtures, optical devices, and other applications. Steel ball magnetically held in spherical socket.The steel ball is subject to a magnetic field in the permanent magnetic system and is thus held in the spherical socket by this magnetic force.It permits the ball a full 360Â° rotation...

Click for more...

Magnet description:
Magnet ID:HS-KD312
Permanent NdFeB Magnetic Ball Joint AssemblyA holding device used for cameras, light fixtures, optical devices, and other applications. The magnetic ball joint assembly allows the steel ball a full 360Â° rotation on a 180Â° axis. This is made possible by the combination of a steel ball (10 mm diameter) and a powerful rare earth magnet contained in the magnet cylinder. The...

Click for more...

Ball Joint Assembly Magnets
inquiry

Magnet description:
Magnet ID:HS-KD310
Ball joints are commonly used in delta-style HSMAG designs, most often in the form of rod end bearings (often called "push rods", "rod ends", etc). Although the term "Traxxas rods" is commonly used to refer to rods with bearings on each end, Traxxas is actually a brand which manufactures such rods and the RC cars they are generally used in.Description : A few hand drawn...

Click for more...

Magnetic Ball Joints
inquiry

Magnet description:
Magnet ID:HS-K8
A holding device used for cameras, light fixtures, optical devices, and other applications. The magnetic ball joint assembly allows the steel ball a full 360Â° rotation on a 180Â° axis. This is made possible by the combination of a steel ball (10 mm diameter) and a powerful rare earth magnet contained in the magnet cylinder. The ball comes threaded as in the diagram for...

Click for more...

Magnet description:
Magnet ID:HS-Rubber-Hook-12
Powerful Permanent Neodymium Magnetic hooks are made from neodymium magnets, the world's strongest magnets. these neodymium magnetic hooks offer much stronger holding power than ceramic hook magnets.This handy and useful neodymium hook magnet has a strong neodymium magnet embedded inside a Nickel coated steel cup to offer the maximum gripping power. A Nickel coated hook is...

Click for more...

Magnet description:
Magnet ID:HS-Rubber-Hook-11
Shape: Magnetic HookMaterial: Sintered Neodymium-Iron-BoronCoating: Nickel, Zinc, Nickel-Cu-Nickel, Rubber, Epoxy, Gold, Silver.Diameter: 2/5"-3"(10mm-75mm)External/internal thread M3,M4,M6,M8,M10OEM: accept.Certificate: ISO9001:2008, REACH,RoHS, SedexWorking...

Click for more...

Magnet description:
Magnet ID:HS-Rubber-Hook-10
To avoid the traditional problems experienced with magnets, a special system that leaves minimal suspension marks and eliminates cooling problems is now available. This system consists of magnet holders in zinc/aluminum that can be attached to 0.157" wire leads. A magnet is pressed into the holder, and then a special silicone rubber mask is placed over the holder. Two metal...

Click for more...

Magnet description:
Magnet ID:HS-Rubber-Hook-9
Pot magnet flat with hook and rubber coating, NdFeBPot magnet with internal thread and rubber coating, NdFeBGalvanized body coated with SANTOPRENE, neodymium magnetic core, anisotropic, working temperature max. +60Â°C.The holding force is determined at room temperature (20Â°C) on a polished plate made of mild steel with a thickness of 10 mm by pulling the magnet vertically...

Click for more...

Magnet description:
Magnet ID:HS-Rubber-Hook-8
Pot magnet flat with hook and rubber coating, Alnico Pot magnet with internal thread and rubber coating, Alnico Galvanized body coated with SANTOPRENE, Alnico magnetic core, anisotropic, working temperature max. +60Â°C.The holding force is determined at room temperature (20Â°C) on a polished plate made of mild steel with a thickness of 10 mm by pulling the magnet...

Click for more...

Red Ndfeb Hook Magnets
inquiry

Magnet description:
Magnet ID:HS-Rubber-Hook-7
Features of magnetic hookscheap strong red painted magnetic hooks 950N pullMagnetic Hooks Size customized Coatingred painted rubber, colorful paintedMagnetization Magnetized through thickness, poles on the flat surfaceMOQ1000 pcsLeading Time15-22working daysSampleYesPull Force About 650N CertificateISO2000, TS16949, RoHS, CE & SGSPaymentT/T, PayPal, Western...

Click for more...

Magnet description:
Magnet ID:HS-Rubber-Hook-6
Our Magnetic hooks are made from neodymium magnets, the world's strongest magnets.These magnetic hooks offer much stronger holding power than ceramic hook magnets. This handy and useful magnetic hook has a strong neodymium magnet embedded inside a Nickel coated steel cup to offer the maximum gripping power. Features of magnetic hookscheap strong painted magnetic hooks 650N...

Click for more...

Magnet description:
Magnet ID:HS-Rubber-Hook-5
Magnetic hooksThese magnetic hooks are produced with hook or eye bolt in different materials. Only high-quality raw materials is used to ensure long durability and efficient holding force. The magnetic ceiling hooks are used for many different holding applications thanks to the high magnetic strength. Ideal for holding applications such as the holding of equipment,...

Click for more...

Magnet description:
Magnet ID:HS-Rubber-Hook-4
Magnets embedded in molded silicone rubber simplefies its production process and lowers producting cost. â€¢Silicone rubber coating prevents damaging furniture surfaceâ€¢Prevents Nd-Fe-B magnets from rustingâ€¢Strengthens ferrite and Sm-Co magnets and prevents them from crackingâ€¢Requires lower molding cost than plastic magnetsâ€¢Variety of shapes can be...

Click for more...

Magnet description:
Magnet ID:HS-Rubber-Hook-3
The magnetic hook be made with the strongest magnetic around! This magnetic hook is great for hanging the kitchen or house. It is easy for keys, kitchen tooling and other hangs. The strong magnetic back ensures that this hook will not be easily knocked off, and keep the produce surface.These hooks are made with neodymium magnets, the latest magnet material with unbelievable...

Click for more...

Magnet description:
Magnet ID:HS-Rubber-Hook-2
Free from damaging furniture surface. â€¢ Charming four different colors. â€¢ Strong holding force upto 6.5kg.â€¢ Silicon coating makes the hook harder to slide. The magnetic hook be made with the strongest magnetic around! This magnetic hook is great for hanging the kitchen or house. It is easy for keys, kitchen tooling and other hangs. The strong magnetic...

Click for more...

Magnet description:
Magnet ID:HS-Rubber-Hook-1
Introduction of HS Magtech:Advantages of Neodymium Magnetic hooks1. High Grade / High performance:highest grade: N54, 52M, 50H, 48SH, 42UH, 38EH, 33AH, etc.magnetic hooks2. High Consistency: The Cpk of Remanence (Br) and Intrinsic Coercive Force (Hcj) are much higher than 1.67. The consistency of the surface magnetic field and magnetic flux can be controlled at +/-1%.magnetic...

Click for more...

Magnet description:
Magnet ID:HSMS-T03
Magnet Sweeper - Magnetic Heavy Duty Rolling Sweeper with Release by HSMAG MagnetsThis Magnetic Heavy Duty Rolling Sweeper is telescoping and can be used to prevent tire damage and personal injury caused by nails, screws, staples, banding, iron chips, scrap steel pieces and more. In addition to making clean-up easy, smart and safe, this Magnetic Sweeper can be used to find...

Click for more...

Magnet description:
Magnet ID:HSMS-T02
Part No. Sweeping Width Overall Width 8-Penny Nail Pick Up Test Approximate Lbs. Pull** Approximate Shipping WeightHSMS-48T ...

Click for more...

Magnet description:
Magnet ID:HSMS-T01
Our newest magnetic sweeper can be used in three different configurations to clear driveways, factory aisles, trucking terminals, parking lots, construction sites and more. Works over any terrain, in any weather condition.Towable magnet can be towed from a variety of vehiclesLoad release feature for easy cleaningBuilt with heavy gauge steel and aircraft-grade aluminum...

Click for more...

Magnet description:
Magnet ID:HSMS-18HD-3
Heavy Duty 18" Rolling Magnetic SweeperPerfect for home, garage, Auto Repair Shop and MoreHeavy Duty Lifting Capacity of 30 PoundsPowerful MagnetTelescopic Contoured Cushion Grip Handle Extends From 31" To 45"Release Handle for Quick And Easy Removal Of Debris.7" Heavy Duty Wheels On Each Side Allow For Easy Use Always Keeping The Sweeper At Just The Right Height For Maximum...

Click for more...

Heavy-duty Magnetic Sweepers with Release

Magnet description:
Magnet ID:HSMS-18HD-2
Part No. Sweeping Width Overall Width 8-Penny Nail Pick Up Test Approximate Lbs. Pull** Approximate Shipping...

Click for more...

Heavy Duty Floor Sweeper
inquiry

Magnet description:
Magnet ID:HSMS-18HD-1
Part No. Sweeping Width Overall Width 8-Penny Nail Pick Up Test Approximate Lbs. Pull** Approximate Shipping...

Click for more...

Heavy Duty Magnetic Sweepers with Handle and Wheels

Magnet description:
Magnet ID:HSMS-24HD-3
The main uses and characteristics:1.It is used in the packing lots, construction site ending cleaning, machine building lines etc. It can efficiently adsorb the small metal parts dropped on the ground. Keep safe, material recycle, cleaning the working place.2.It can be used on any condition except at high temperature. 3.It can keep the magnetic force for a long time, can be...

Click for more...

Magnet description:
Magnet ID:HSMS-24HD-2
Part No. Sweeping Width Overall Width 8-Penny Nail Pick Up Test Approximate Lbs. Pull** Approximate Shipping...

Click for more...

Magnet description:
Magnet ID:HSMS-24HD-1
The HSMAG Sweep-Ease Permanent Magnetic sweepers provide a high strength rugged magnetic assembly in a severe duty pan housing for the greatest durability in heavy use Industrial and Commercial applications. The newly re-designed Magnetic Sweeper is best for fast, easy cleaning of floors and aisles. The Storch Magnetic Push Sweeper features an ergonomic...

Click for more...

Magnet description:
Magnet ID:HSMS-36HD-4
Part No. Sweeping Width Overall Width 8-Penny Nail Pick Up Test Approximate Lbs. Pull** Approximate Shipping...

Click for more...

Magnet description:
Magnet ID:HSMS-36HD-3
Part No. Sweeping Width Overall Width 8-Penny Nail Pick Up Test Approximate Lbs. Pull** Approximate Shipping...

Click for more...

Heavy Duty Magnetic Sweeper
inquiry

Magnet description:
Magnet ID:HSMS-36HD-2
Part No. Sweeping Width Overall Width 8-Penny Nail Pick Up Test Approximate Lbs. Pull** Approximate Shipping...

Click for more...

Magnet description:
Magnet ID:HSMS-36HD-1
Extra Heavy Duty Magnetic SweepersDesigned for long wear and durability. Back-mounted wheels allow for easy access to corners and protect wheels from debris. Ideal for construction companies or rental shops! Permanent magnetism guaranteed Quick-load release lever Heavy duty, durable construction Designed for extended use over rough terrain, even in water! All models are...

Click for more...

Rotary Magnetic Sweepers
inquiry

Magnet description:
Magnet ID:HSMS-H04
Rotary Magnetic SweepersEfficient and Easy To CleanHSMAG's Rotary Magnetic Sweepesr are the ideal magnetic tool for picking iron or steel particles from floors, driveways or other areas. Easy to maintain. Never needs to be remagnetized. Magnetool magnetic sweepers have great pickup and carrying capacity, using entire 360 surface of rotating 1-1/8" aluminum tube. Picked up...

Click for more...

Magnet description:
Magnet ID:HSMS-H03
These are super-powered, permanent magnets for the removal of sharp iron objects from roads, parking areas, loading docks, runways and other important traffic areas. Our hang-type magnetic sweepers greatly reduce the possibility of costly dangerous flat tires and injuries caused by nails, scrap iron particles, staples, etc. Simply hang a magnetic sweeper from your forklift or...

Click for more...

Magnet description:
Magnet ID:HSMS-H02
Our newest magnetic sweeper can be used in three different configurations to clear driveways, factory aisles, trucking terminals, parking lots, construction sites and more. Works over any terrain, in any weather condition.Towable magnet can be towed from a variety of vehiclesLoad release feature for easy cleaningBuilt with heavy gauge steel and aircraft-grade aluminum...

Click for more...

Hang-Type Magnetic Sweeper
inquiry

Magnet description:
Magnet ID:HSMS-H01
These are super-powered, permanent magnets for the removal of sharp iron objects from roads, parking areas, loading docks, runways and other important traffic areas. Our hang-type magnetic sweepers greatly reduce the possibility of costly dangerous flat tires and injuries caused by nails, scrap iron particles, staples, etc. Simply hang a magnetic sweeper from your forklift or...

Click for more...

Magnet description:
Magnet ID:HSMS-13P-3
Magnet Sweeper - Magnetic Mini Rolling Sweeper with Release by HSMAG MagnetsThis Magnetic Mini Rolling Sweeper is telescoping and can be used to prevent tire damage and personal injury caused by nails, screws, staples, banding, iron chips, scrap steel pieces and more. In addition to making clean-up easy, smart and safe, this Magnetic Sweeper can be used to find lost items that...

Click for more...

Magnet description:
Magnet ID:HSMS-13P-2
Magnetic Mini SweepersPick up nails, screws, paper clips and any other ferrous metal items. Clear collected debris with work gloves or a heavy shop towel. Light aluminum housing. Excellent for home, shop or office. Part No. Sweeping Width Overall...

Click for more...

Magnet description:
Magnet ID:HSMS-13P-1
Magnetic Mini Sweeper with Release This incredibly strong sweeper easily picks up small ferrous metal objects such as shavings or nails that could cause injury or costly tire repairs. Just roll the sweeper over any area to collect metal pieces. The Quick Release mechanism is a simple slide of the handle that drops collected scrap metal into the recycle bin. Ideal for...

Click for more...

Magnetic Mini Floor Sweeper
inquiry

Magnet description:
Magnet ID:HSMS-27P-4
Magnetic Mini SweepersPick up nails, screws, paper clips and any other ferrous metal items. Clear collected debris with work gloves or a heavy shop towel. Light aluminum housing. Excellent for home, shop or office. Part No. Sweeping Width Overall...

Click for more...

Magnet description:
Magnet ID:HSMS-27P-3
27" Rolling Magnetic SweeperPerfect for home, garage, Auto Repair Shop and MoreHeavy Duty Lifting Capacity of 30 PoundsPowerful MagnetTelescopic Contoured Cushion Grip Handle Extends From 31" To 45"Release Handle for Quick And Easy Removal Of Debris.7" Heavy Duty Wheels On Each Side Allow For Easy Use Always Keeping The Sweeper At Just The Right Height For Maximum...

Click for more...

27" Magnetic Mini Sweeper
inquiry

Magnet description:
Magnet ID:HSMS-27P-2
Magnetic Mini SweepersPick up nails, screws, paper clips and any other ferrous metal items. Clear collected debris with work gloves or a heavy shop towel. Light aluminum housing. Excellent for home, shop or office. Part No. Sweeping Width Overall...

Click for more...

Push Mini Magnetic Sweepers
inquiry

Magnet description:
Magnet ID:HSMS-27P-1
This sweeper is ideal for steel shot, and it picks up metal debris quickly and easily.FEATURESIncludes a release handleThree-height adjustable settings of 1 inch, 2 inches and 3 inchesWheeled construction makes it easy to push across surfaces.24 inch magnet, 25 inch widthMagnetic Mini SweepersPick up nails, screws, paper clips and any other ferrous metal items. Clear collected...

Click for more...

Mini Magnetic Sweeper
inquiry

Magnet description:
Magnet ID:HSMS-14P-3
The HS-Magnets Hand Held Magnetic Sweeper provides the perfect solution to the problem of clearing small ferrous metal objects, such as nails, tacks, nuts, bolts, paperclips and metal shavings from a workshop or garage floor to leave the floor area clean and tidy.The sweeper has a stainless steel construction, and is fitted with two large robust rubber wheels with puncture...

Click for more...

Push Mini Magnetic Sweepers
inquiry

Magnet description:
Magnet ID:HSMS-14P-2
Pick up iron, nails, steel particles effortlessly up to 30 lbs from floors, driveways, warehouse, garden, lawn or other areas.Easily remove particles picked up with the quick release handle.Sweep height is adjustable from 31-inch to 45-inch, and the adjustable handle provides additional flexibility.The sweeper features convenient and sturdy 7-inch wheels, and 36-inch wide...

Click for more...

Magnetic Mini Sweepers
inquiry

Magnet description:
Magnet ID:HSMS-14P-1
Magnetic Mini SweepersPick up nails, screws, paper clips and any other ferrous metal items. Clear collected debris with work gloves or a heavy shop towel. Light aluminum housing. Excellent for home, shop or office. Part No. Sweeping Width Overall...

Click for more...

Magnet description:
Magnet ID:HSMS-12P-2
Magnetic SweepersRemove steel debris from roads, airports, schools, loading docks and many more...This powerful permanent magnetic sweepers are ideal for picking up steel chips, shavings, screws, nails, etc. from floor, driveways, construction sites and loading docks.All components are made in USA.Reduces maintenance costs due to flat tires.Reduce safety hazards to...

Click for more...

Magnet description:
Magnet ID:HSMS-12P-1
Part No. Sweeping Width Overall Width 8-Penny Nail Pick Up Test Approximate Lbs. Pull** Approximate Shipping...

Click for more...

Magnet description:
Magnet ID:HSMS-24P-4
Part No. Sweeping Width Overall Width 8-Penny Nail Pick Up Test Approximate Lbs. Pull** Approximate Shipping...

Click for more...

Magnet description:
Magnet ID:HSMS-24P-3
Part No. Sweeping Width Overall Width 8-Penny Nail Pick Up Test Approximate Lbs. Pull** Approximate Shipping...

Click for more...

Magnet description:
Magnet ID:HSMS-24P-2
Magnetic Floor SweepersCollect large quantities of dangerous scrap metal or scattered ferrous metal items with ease. Clear collected debris from sweeper with work gloves or a heavy shop towel.Permanent magnetism guaranteedLight aluminum housingEasy to operate over most terrain36" model converts to a hang-type sweeper24" model picks up 7.5 lbs. of 8-penny nails, about 680...

Click for more...

Push-Type Magnetic Sweeper
inquiry

Magnet description:
Magnet ID:HSMS-24P-1
Part No. Sweeping Width Overall Width 8-Penny Nail Pick Up Test Approximate Lbs. Pull** Approximate Shipping...

Click for more...

Magnet description:
Magnet ID:HSMS-36P-3
Magnetic SweeperMagnetic Sweepers are widely used in industry, factory, and home. It offers an easy way to collect large quantities of nails, screws, paper clips and any other ferrous metal items to keep work areas clean of dangerous ferrous metal debris. Features:1. Permanent magnetism guaranteed2. Easy and fast release by pull out the handle knob on...

Click for more...

Magnet description:
Magnet ID:HSMS-36P-2
Part No. Sweeping Width Overall Width 8-Penny Nail Pick Up Test Approximate Lbs. Pull** Approximate Shipping...

Click for more...

Magnetic Floor Sweepers
inquiry

Magnet description:
Magnet ID:HSMS-36P-1
Magnetic Floor SweepersCollect large quantities of dangerous scrap metal or scattered ferrous metal items with ease. Clear collected debris from sweeper with work gloves or a heavy shop towel. Light aluminum housing. Easy to operate over most terrain. 36â€ model converts to a hang-type sweeper. All models are 1.75â€ high by 5â€ deep (does not include wheel...

Click for more...

Magnet description:
Magnet ID:HSMS-18PR-3
18 inch Magnetic Floor Sweeper with Release Easy and fast way to collect large quantities of nails, screws, paper clips and any other ferrous metal items to keep work areas clean of dangerous ferrous metal debris. Quick load-release handle clears collected pieces. Adjustable sweeping height from .5â€ to 2.5â€. Permanent magnetism guaranteed.Part...

Click for more...

Magnet description:
Magnet ID:HSMS-18PR-2
18 inch Magnetic Floor Sweeper with Release Easy and fast way to collect large quantities of nails, screws, paper clips and any other ferrous metal items to keep work areas clean of dangerous ferrous metal debris. Quick load-release handle clears collected pieces. Adjustable sweeping height from .5â€ to 2.5â€. Permanent magnetism guaranteed.Part...

Click for more...

18 inch Magnetic Floor Sweeper with Release

Magnet description:
Magnet ID:HSMS-18PR-1
The main uses and characteristics:1.It is used in the packing lots, construction site ending cleaning, machine building lines etc. It can efficiently adsorb the small metal parts dropped on the ground. Keep safe, material recycle, cleaning the working place.2.It can be used on any condition except at high temperature. 3.It can keep the magnetic force for a long time, can be...

Click for more...

Magnet description:
Magnet ID:HSMS-14PR-3
Quickly and easily clear workshop and factory floors, offices, sports pitches, garages and car parks of spilt ferrous items or potentially damaging and dangerous metal debris such as nails, pins, staples, mild steel shards, nuts, bolts, screws, paperclips, metal shavings and metal fragments. The Magnetic Sweepers can be used in many environments at work and in and around...

Click for more...

Magnet description:
Magnet ID:HSMS-14PR-2
Use this magnetic sweeper for picking up loose fasteners and metal pieces on your shop floor. Also picks up metal items from grass and dirt to keep screws out of your tires and loose nails out of the path of lawnmowers. Often used by roofing contractors to remove stray fasteners from lawns and driveways to keep customers happy. Also reduces onsite injuries from collecting...

Click for more...

Magnet description:
Magnet ID:HSMS-14PR-1
Magnetic Sweepers with Release These push-type sweepers feature 24â€ and 14â€ sweeping widths, 48â€ sturdy handle and 6â€ diameter rubber wheels. Quickly drop collected scrap metal by pulling back on the release handle. These sweepers are incredibly strong and well built, yet very affordable.Part...

Click for more...

Magnet description:
Magnet ID:HSMS-24PR-4
24 inch Magnetic Sweeper is heavy duty aluminum pickup tool works on a variety of surfaces. The heavy duty construction holds up to 30 pounds of ferrous objects. The aluminum body measures 3 inches x 4 inches x 30 inches. The quick release load lever and adjustable extension handle makes for easy use. is - 24 " Magnetic Sweeper - This heavy duty aluminum pickup tool...

Click for more...

Magnet description:
Magnet ID:HSMS-24PR-3
Magnetic Sweepers with Release These push-type sweepers feature 24â€ and 14â€ sweeping widths, 48â€ sturdy handle and 6â€ diameter rubber wheels. Quickly drop collected scrap metal by pulling back on the release handle. These sweepers are incredibly strong and well built, yet very affordable.Part...

Click for more...

Magnet description:
Magnet ID:HSMS-24PR-2
Part No. Sweeping Width Overall Width 8-Penny Nail Pick Up Test Approximate Lbs. Pull** Approximate Shipping...

Click for more...

Magnet description:
Magnet ID:HSMS-24PR-1
Magnetic Sweepers with Release These push-type sweepers feature 24â€ and 14â€ sweeping widths, 48â€ sturdy handle and 6â€ diameter rubber wheels. Quickly drop collected scrap metal by pulling back on the release handle. These sweepers are incredibly strong and well built, yet very affordable.Part...

Click for more...

Magnet description:
Magnet ID:03 Series Flange Type
Magnetic Couplings consist of an outer and an inner drive.The two drives do not touch each other - the coupling works via the non-contact transfer of power, which means that the magnetic solution - in contrast to traditional solutions - does not experience any wear. The Magnetic Couplings is thus maintenance-free.We can design and produce different magnetic couplings according...

Click for more...

Permanent Magnetic Coupling (Axel Hole Type)

Magnet description:
Magnet ID:02 Series Axel Hole Type
Magnetic coupling is a new kind of coupling,which connects motor and machine by permanent magnetic force.They work in the sealless magnetic drive pumps,which transporting volatile,flammable,explosive and toxic solutions with no leakage. The appearance of Magnetic coupling solved thoroughly the leak problems existed in dynamic sealing of certain mechanical devices.Magneic...

Click for more...

Magnetic Coupling (Unthreaded Hole Type)

Magnet description:
Magnet ID:01 Series Unthreaded Hole Type
A Magnetic Coupling is a means of transferring torque from one shaft to another without a physical mechanical connection. Magnetic shaft couplings are most often used for liquid pumps and propeller systems, since a static, physical barrier can be placed between the two shafts to separate the fluid from the motor operating in air. Magnetic shaft couplings preclude the use of...

Click for more...

Magnetic Base Coolant Hose System with On/Off switch

Magnet description:
Magnet ID:WBM, WBH
Base with On/Off switch Water intake can be whirled Many models to suit your specific application needsPowerful magnet and strong clamping force for consistent and accurate measurements Magnetic bases are a common fixture in metalworking projects, typically for holding dial indicators. The Magnetic Base Coolant Hose System B has an On/Off Switch and allows the user to control...

Click for more...

Magnet description:
Magnet ID:BM
Water intake can be whirled Base with On/Off switch Powerful magnet and strong clamping force for accurate measurements Wide variety of models Magnetic bases are a common fixture in various metalworking projects. The Magnetic Base Coolant Hose System A has an On/Off Switch and allows the user to whirl the water around in the system. You can choose from a variety of models, and...

Click for more...

Magnetic Lamp Base
inquiry

Magnet description:
Magnet ID:MSL
Base with On/Off switch Lamp-shade adopts PBT-enhanced engineering plastic which is heat-resisting/impact-resisting (MST/MSD)Many varieties to choose fromPowerful magnet and strong clamping force ensures accurate measurement Magnetic bases are a common fixture in various metalworking projects. The Magnetic Lamp Base has an On/Off switch with a PBT-enhanced lamp shade...

Click for more...

Magnetic Bases
inquiry

Magnet description:
Magnet ID:ST
Base with fine adjustment and On/Off switch Many models of your choiceStrong magnetism and clamping force to ensure precise measuring Magnetic bases are common fixtures in a variety industrial and metalworking projects. ST Series Magnetic Bases feature a fine adjustment and On/Off switch. The vertical post and rod in a magnetic base connect using swiveling snugs or...

Click for more...

Vacuum Base Indicators
inquiry

Magnet description:
Magnet ID:TDH, TDE-CC
For all kinds of measuring on granite plates or other non-magnetic smooth surfaces Powerful vacuum base holderFine adjustment Dovetail groove for test indicators Wide variety of models to choose fromVacuum Base Indicators are great for any kind of measuring on granite or any other smooth non-magnetic surface. The indicators feature a fine adjustment, a powerful magnetic vacuum...

Click for more...

Universal Indicator Bases
inquiry

Magnet description:
Magnet ID:WWZ
Fine adjustment Base with T-groove Many models to choose from for any applicationMagnetic bases are commonly used in metalworking to hold dial indicators. Universal Indicator Bases can be a useful tool for any project....

Click for more...

Mini Mechanical Universal Magnetic Bases

Magnet description:
Magnet ID:NH-HP
Smaller than other types of magnetic basesHas On/Off switch and adjustmentComes in six colors â€“ red, blue, golden, white, black and silverMany available models to suit your applicationsPowerful magnetism for accurate measurementsMini Mechanical Universal Magnetic Bases are a common fixture in many metalworking and other work projects. They are smaller than other...

Click for more...

Mini Magnetic Base D
inquiry

Magnet description:
Magnet ID:Mini Magnetic Base D
Wide variety of models to select fromSmaller than other types of magnetic bases Powerful magnet and strong clamping force ensures consistent, precisely accurate measurements The Mini Magnetic Base D is a fixture commonly seen in a variety of metalworking projects. Magnetic bases make setting up a workpieces much easier. The vertical post and rod in a magnetic base...

Click for more...

Mini Magnetic Base C
inquiry

Magnet description:
Magnet ID:Mini Magnetic Base C
Strong magnetism allows for accurate measurementSmaller in size compared to other types of magnetic bases Many model choices to suit your needsThe Mini Magnetic Base C is a typically used in metalworking activities and may also be used in other fields such as optics. Magnetic bases assists with setting up a workpiece in machinery. The vertical post and rod in a magnetic base...

Click for more...

Mini Magnetic Base B
inquiry

Magnet description:
Magnet ID:Mini Magnetic Base B
Fine adjustmentSmaller than other types of magnetic basesMany model options to suit your specific applicationPowerful magnet and strong clamping force to ensure consistent, highly accurate measurement The Mini Magnetic Base B is typically used in metalworking projects. Magnetic bases help with setting up workpieces in various types of machinery. The vertical post and rod in...

Click for more...

Mini Magnetic Base
inquiry

Magnet description:
Magnet ID:Mini Magnetic Base A
Dovetail groove for test indicatorSmaller than other types of magnetic bases Fine adjustment Many model options to suit your application needsPowerful magnet with strong clamping force for accurate and consistent measuringThe Mini Magnetic Base A is typically used for metalworking and other projects involving machinery. Magnetic bases help with setting up workpieces in various...

Click for more...

Magnet description:
Magnet ID:CV
On/Off switch With fine adjustment Powerful, with strong clamping force for consistent and precise measurements Wide variety of model choices to suit your needsThe Flexible Stem Magnetic Base B is typically used for metalworking and other projects where machinery is used. The vertical post and rod in the magnetic base is connected by swiveling snugs or connectors, which allows...

Click for more...

Flexible Stem Magnetic Base
inquiry

Magnet description:
Magnet ID:CV
Powerful, with strong clamping force for consistent and precise measurements Wide variety of model choices to suit your needsFine adjustment and On/Off switchDovetail groove for test indicator The Flexible Stem Magnetic Base A is typically used for metalworking and other projects requiring machinery. Magnetic bases makes the task of setting up workpieces in various types of...

Click for more...

High Lock Mechanical Universal Magnetic Base

Magnet description:
Magnet ID:WCE
Magnetic base with circular switch Has On/Off switch Steel arm and cylinderDovetail groove for test indicator Strong magnetism and clamping force ensures accurate and consisting measurements Many model choices to suit every applicationMagnetic bases are typically used in metalworking for holding dial indicators. High Lock Mechanical Universal Magnetic Base make setting...

Click for more...

Magnet description:
Magnet ID:WCE
Has On/Off switch Dovetail groove for test indicator Many available models to suit your needsMagnetic base with circular switch Powerful magnet with strong clamping force to ensure consistent and accurate measurements Magnetic bases are typically used in metalworking for holding dial indicators. The Heavy Duty Mechanical Magnetic Bases can make setting up workpieces in...

Click for more...

Magnet description:
Magnet ID:WCE
With On/Off switchDovetail groove for test indicatorMagnetic base with circular switch Strong clamping force ensures consistent, highly accurate measurement Many models available to suit your needs A common use for magnetic bases are metalworking to hold dial indicators. Mechanical Universal Magnetic Bases can assists in setting up workpiece in machinery such as surface...

Click for more...

Magnet description:
Magnet ID:CZ
Main stem that is fixed on the side of base Has On/Off switch Magnetic base with circular switch Strong clamping force for accurate and consistent measurement Your choice of a wide variety of productsMagnetic bases are mostly used in metalworking to hold dial indicators. Beam-Shaped Structure Magnetic Bases are useful tools for setting up workpieces in milling machines,...

Click for more...

Magnet description:
Magnet ID:YW
Has On/Off switchDovetail groove for test indicator Wide variety of modelsMagnetic base with circular switch Powerful magnet with a strong clamping force to ensure accurate and consistent measurementsMagnetic bases are magnetic fixtures commonly used in metalworking to hold dial indicators and are also used in other fields such as optics. Hydraulic Universal Magnetic Bases...

Click for more...

Magnetic Base
inquiry

Magnet description:
Magnet ID:Din Series
Wide variety of models availableFeatures fine adjustmentMagnetic base with circular switch Strong clamping force ensures consistent, accurate measurements Dial indicator with lug back or plain backStrong, powerful magnetMagnetic bases are fixtures used in metalworking to hold dial indicators and commonly used in optics. The Din Series Magnetic Bases makes setting...

Click for more...

Magnetic Base with Guide Screw Adjustment

Magnet description:
Magnet ID:SL Series
Has fine guide screw adjustment Magnetic base with 3 V-groove and On/Off switch Dial indicator with lug back or plain back Variety of models available to suit your applicationsStrong clamping force ensures consistent, highly accurate measurement Powerful magnet Magnetic bases are fixtures typically used in metalworking to hold dial indicators and in other fields like optics....

Click for more...

Magnet description:
Magnet ID:Magnetic Base With Fine Adjustment B
Powerful magnet with strong clamping force to ensure consistent and accurate measurement Magnetic base with On/Off switchBranch stem with fine adjustment Various models to suit your applicationDial indicator with lug back or plain backMagnetic bases are fixtures typically used in metalworking to hold dial indicators and in other fields like optics. The Magnetic Base With Fine...

Click for more...

Magnet description:
Magnet ID:Magnetic Base with Fine Adjustment A
Branch stem with fine adjustment Magnetic base with On/Off switch Various models to suit your applicationPowerful magnet with strong clamping force to ensure consistent and accurate measurement Dial indicator with lug back or plain back Magnetic bases are magnetic fixtures commonly used in metalworking to hold dial indicators and in fields such as optics. The Magnetic Base...

Click for more...

General Magnetic Bases with On/Off Switch

Magnet description:
Magnet ID:Magnetic Base General type B
A wide variety of models to suit your needs Powerful magnetism and strong clamping force ensures consistent, accurate measurementMagnetic base with On/Off switch Dial indicator with lug back or plain backGeneral Magnetic Bases are widely used in metalworking to hold dial indicators. They are also used in other fields such as optics. The General Magnetic Base B helps you set up...

Click for more...

The General Magnetic Base
inquiry

Magnet description:
Magnet ID:Magnetic Base General type A
Magnetic base with On/Off switchPowerful magnet and strong clamping forceensureconsistent, accurate measurementA wide variety of modelsare available to suit your applicationsDial indicator with lug back or plain backThe General Magnetic Base A is a magnetic fixtures commonly used in metalworking to hold dial indicators and in other fields such as optics. Magnetic bases can...

Click for more...

Magnet description:
Magnet ID:V1
V-shape block, magnetic induction block (magnetic mass)Nonmagnetic mass and V-shaped iron can be conducted magnetic at any magnetic plates to be used as plane or 45Â° tools â€¢ High Powered Chucks for use on soft material.â€¢ Solid Top and Bottom Plates assure retained accuracy.â€¢ Full loading power over entire plates.â€¢ Has a positive hand...

Click for more...

Wheel Angle Shaper ( Angle Sing Dresser)

Magnet description:
Magnet ID:W1
Instead of inconvenience of traditional angle shapers, grinding wheel angle shapers can be adjusted height freely with screws at both sides. The slide bar can be used as 50mm sine protractor, 0Â°-60Â° of whom are within 0.005mm precision by adopting various...

Click for more...

Magnet description:
Magnet ID:X11
Electro permanent magnetic chuck is the best magnetic clamping tool at present, which use electro pulse to â€œopen and closeâ€. It is very safe and reliable when workpiece is attracted by magnetic chuck in process. After attract workpiece by magnetism, the magnetic chuck holds the magnetism permanently. â€œOpen and closeâ€ time is less than 1 second, electric...

Click for more...

Magnet description:
Magnet ID:X51
Classified by structure, round permanent-magnet chucks include common type, straight intensive type and radiative pole type.Magnetic Chuck is the most widely accepted Permanet Magnetic Chuck, in Machine Tool Industry. Our design offers maximum holding power, ease of installation and operation. Rectangular Magnetic Chucks are manufactured in heavy duty types. Heavy Duty Chuck...

Click for more...

Magnet description:
Magnet ID:X45
Use: applicable to angle grinding and cutting of grinding machine.Feature: with scale on the revolving principal axis, it is applicable to grinding at all angles.Once shaped of the principal axis.Without change in the plane precision when ON/OFF switch.magnetic chuck Extra strong magnetic force and less remaining magnetism Coolant and water proof structure high...

Click for more...

Magnet description:
Magnet ID:X44
Wire-cutting versatile permanent magnetic chuck can be rotated 360Â°or at any leaning angle, calibration wire cutting steel is very convenient, highly precise and tightly suctorial, which is an ideal accessory equipment. Magnetic Chuck is the most widely accepted Permanet Magnetic Chuck, in Machine Tool Industry. Our design offers maximum holding power, ease of installation...

Click for more...

Double Sine Plate Permanent Magnetic Chuck

Magnet description:
Magnet ID:X43
magnetic chuck Extra strong magnetic force and less remaining magnetism Coolant and water proof structure high precisionFactory Price surface grinder magnetic chuck:1.Features of Chucka. All metal top plates-hard wearing brass and steelb. Extra strong magnetic force and less remaining magnetismc.While turning magnetic for ON/OFF, the face's accuracy of...

Click for more...

Magnet description:
Magnet ID:X42
1.Features:a) Large effective area for machining the work pieces; b) Positive locking at all angles without any distortion;c) Constructed of hardened alloy tool steel.;d) Angle precision 0.007/ 100mm;e) Low height for more wheel clearance;2.Magnetic chuck Application: Flat type for wide ranges of uses. Ideal for high accuracy grinding...

Click for more...

Magnet description:
Magnet ID:X42
Magnetic Chuck (Rectangular)â€¢ High Powered Chucks for use on soft material.â€¢ Solid Top and Bottom Plates assure retained accuracy.â€¢ Full loading power over entire plates.â€¢ Has a positive hand release.â€¢ Pole Divisions are arranged for holding Small, Thin and large pieces.â€¢ Available in Standard Poles & Straight. Power Permanent magnetic...

Click for more...

Rectangular Cast Steel Permanent Magnetic Chuck

Magnet description:
Magnet ID:XQ41
Magnetic chuck and magnetic chuck's working principle:A magnetic chuck in which the magnetic holding force is produced by permanent magnets and mechanically movable means are provided for diverting the magnetic flux and thus facilitate removal of the workpiece in the unclamped position.For suppressing an undesirable magnetic shunt from the magnetic chuck through the machine...

Click for more...

Magnet description:
Magnet ID:X41
Use:Applicable to plane grinding machine, discharge processing machine, carving machine and processing center.Feature:Without change in the plane precision of magnetic side when ON/OFF switch.Fine pole spacing, even magnetic power, applicable to small parts or thin articles.Use high-performance magnetic steel, with little magnetic property left.High precision and little...

Click for more...

Nickle Plated Magnetic Door Catcher Latch Magnets

Magnet description:
Magnet ID:M5W
Our magnetic catches are used in many different applications including: doors, automobile, trucks, electronic enclosures, exhibits and many more. Engineered and manufactured to strict standards, our magnetic catches can be used in many industrial product. Our magnetic catches are available in many styles and colors. Magnetic Assembly, Bronze Color Coated Magnetic Door...

Click for more...

Magnet description:
Magnet ID:M5GB
Magnetic Catches Our magnetic catches are used in many different applications including: doors, automobile, trucks, electronic enclosures, exhibits and many more. Engineered and manufactured to strict standards, our magnetic catches can be used in many industrial product. Our magnetic catches are available in many styles and colors. Keyword...

Click for more...

Magnet description:
Magnet ID:M4W-S
Magnetic Catch, ABS Magnetic Door Catcher, Magnetic Assembly, Bronze Color Coated Magnetic Door Catcher, Zinc Alloy Magnetic Door Catcher, Nickle Plated Magnetic Door Catcher, Stainless Steel Magnetic Door Catcher, Plastic Magnetic Door Catchermaterial of body & cover: Plastic material of plate:SPCC Chrome plated The door catcher contains a high magnetism...

Click for more...

Magnet description:
Magnet ID:M4GB-S
Latch MagnetsTypes Functions ApplicationsLatch Magnets Latch magnets are important magnets that are used for locking doors, windows, pool gates etc. These are powerful and reliable safety magnets that are used widely. The latch magnets come in various shapes, sizes and width depending upon the applications. There are various ways by which latch magnets are...

Click for more...

ABS Magnetic Door Catcher
inquiry

Magnet description:
Magnet ID:M4W-D
1.Size:39.6x26.05x9.4mm 2.Sturdy design with good wall thickness for durabilityApplicationThe Magnetic Door Catcher can used in Wooden wardrobes & cabinets, and they are convenient for you.FAQ In order to provide you the suitable price and correct products, before your enquiry, could you please tell us:1. Which size do you need? Provide your drawings, size,...

Click for more...

Magnet description:
Magnet ID:M4GB-D
magnetic door catcher 1.Material: Metal+plastic 2.Finished:Zinc color 3.Passed ISO9001:2008 4.Passed ISO9001Advantages for furniture & cabinet & door user:1. Easy to use/fixing2. Excellent durability3. High quality4. Superior quality and knight service5. Screw mounted6. Single/double door available7. Many shapes available8. Samples are free9. Passed...

Click for more...

Magnet description:
Magnet ID:M3W
1. Material: ABS, plastic, magent, brass2. Color: White, black, etc.3. Size: L24.5xW21.5xH15mm(Different size under your requirement)4. Force of magnetic attraction: 1.5-4kg5. Application: Widely used in door closed6. NOTE: Firstly, you can choose any model from our pictures;Secondly, your designs are acceptable, you can order from us after the samples are...

Click for more...

Magnet description:
Magnet ID:M3GB
Name:magnetic cabinet catcher Good Quality Favorable Price Prompt deliveryName: magnetic cabinet catcherUsage: Cabinet catches basically help to keep the cabinet doors closed and also prevent them from damage due to continuous use. They are mainly used on doors which are not provided with self-closing hinges. Cabinet catches are available in different...

Click for more...

Magnetic Door Catcher Heavy Duty Latches and Catches

Magnet description:
Magnet ID:M3AW
Material of body: ABS Material of plate: SPCC white color coated Customized:a. Logo: it could be marked upon your design.b. Size: It also could be made according to your requests.c. Color: it could be made to any color which you would likePayment:For small amount, our usual way of payment is 100% T/T in advance, Western Union or Papal.For large amount, we also...

Click for more...

High Performance Magnet for Door Catcher

Magnet description:
Magnet ID:M3AGB
ApplicationThe Magnetic Door Catcher can used in Wooden wardrobes & cabinets, and they are convenient for you.FAQ In order to provide you the suitable price and correct products, before your enquiry, could you please tell us:1. Which size do you need? Provide your drawings, size, pictures etc.2. How many pull force and which grade of magnets do you need, such...

Click for more...

Magnet description:
Magnet ID:M1AW
Neodymium Magnet for Door Catcher White Latch MagnetsTypes Functions ApplicationsLatch Magnets Latch magnets are important magnets that are used for locking doors, windows, pool gates etc. These are powerful and reliable safety magnets that are used widely. The latch magnets come in various shapes, sizes and width depending upon the applications. There are various...

Click for more...

Magnet description:
Magnet ID:M1AGB
Powerful Magnetic Door Catcher Shape: Round, Block and more Reasonable Price Delivery time: 5~15 daysWe are professional and creative in design. Our reliable production ability of Powerful Magnetic Door Catcher with Inspection Mirror set will definitely satisfy your requirement.Powerful Magnetic Door CatcherDescription Powerful Magnetic Door...

Click for more...

Cupboard Magnetic Catch
inquiry

Magnet description:
Magnet ID:M1W
Material: Plastic or Stainless steel & magnetsSize: Various as per your requestsColor: White, black or others according to your requirementSpecification:1. Cupboard Magnetic Catch, Permanent magnetic catcher, Magnetic door catcher assembly is made of high quality material of ABS Plastic, which is durable enough for your daily use2. Cupboard Magnetic Catch,...

Click for more...

Magnet description:
Magnet ID:M1GB
Door Catcher, Magnetic Assembly, Bronze Color Coated Magnetic Door Catcher, Zinc Alloy Magnetic Door Catcher, Nickle Plated Magnetic Door Catcher Powerful Magnetic Door Catcher Shape: Round, Block and more Reasonable Price Delivery time: 5~15 daysWe are professional and creative in design. Our reliable production ability of Powerful Magnetic Door...

Click for more...

Magnet description:
Magnet ID:DC-05M
material of body & cover: Zinc alloy material of plate: SPCC Nickle plated Magnetic door stopper With clamp magnets,used for all types of doors High quality,low price,fast delivery Easy to fix doorsMagnetic Door Catcher/Magnetic Door stopperGeneral Introduction 1, Magnetic door stopper or door suctions, with clamp magnets, are used for...

Click for more...

Bronze Color Coated Magnetic Door Catcher

Magnet description:
Magnet ID:DC-03WD
Material of body: ABS Material of plate: SPCC Bronze color coated Customized:a. Logo: it could be marked upon your design.b. Size: It also could be made according to your requests.c. Color: it could be made to any color which you would likePayment:For small amount, our usual way of payment is 100% T/T in advance, Western Union or Papal.For large...

Click for more...

Magnet description:
Magnet ID:DC-03PK
Material of body: ABSMaterial of plate: SPCC platedmagnetic door catcher 1. high intensity, various shapes 2.Grade: N35-N52,(M,H,SH,UH,EH) 3.Plating: Ni,Zn etcSpecification: Product name: Permanent magnetic door catcher 1.Grade: N33, N35, N38, N40, N42, N48, N50, N52 (M, H, SH, EH, UH,AH)2.Shape: Disc, Cylinder, Block, Ring, Countersunk, Segment,...

Click for more...

Magnet description:
Magnet ID:DC-01GD
material of body & cover: Nylonmaterial of plate:SPCC Chrome plated The door catcher contains a high magnetism permanent magnet, which ensures the stability of the door. Compact size saves room and makes the door catcher more concealedMaterial: Plastic or Stainless steel & magnetsSize: Various as per your requestsColor: White, black or others...

Click for more...

Magnet description:
Magnet ID:DC-01BK
magnetic door catcher material of body & cover: Nylonmaterial of plate:SPCC Chrome plated 3.Passed ISO9001:2008 4.Passed ISO9001Advantages for furniture & cabinet & door user:1. Easy to use/fixing2. Excellent durability3. High quality4. Superior quality and knight service5. Screw mounted6. Single/double door available7. Many shapes available8....

Click for more...

Precast Concrete Magnetic Shutter Formwork System

Magnet description:
Magnet ID:MSS-20
HSMAG Precast produced shuttering magnet 450KGS/900KGS / 1800KGS /2100KGS which is a small size shuttering magnet specification for steel precast concrete platform. shuttering magnet is an ideal range of applications perfectly suitable for all kinds of precast concrete formwork construction, both for wood and steel shuttering. All shuttering magnets have extraordinarily high...

Click for more...

Magnet description:
Magnet ID:MSS-19
Formwork System assemblyed by a powerful magnets inserted and a U steel out profile. formwork profile U60 Prosystem - Fast, Secure, Efficient universal system for precast concrete productionEasy positioning, fasting and releasingSuitable for all current formwork robots or manual handling.variety heights is available( able to custom made)Magnets do not have to be...

Click for more...

Magnet description:
Magnet ID:MSS-18
This formwork-system, consist of a formwork-profile (steel) with integrated magnetic tension-mechanism, which can be used in different formworks. It is specially suitable for the production of filigran- respectively double walls and lattice girder ceilings. By mean of the tension-mechanism, the profile (layer is planed) is pulled to the bottom of the shuttering, so that an...

Click for more...

Concrete Shuttering Magnets for Formwork

Magnet description:
Magnet ID:MSS-17
Magnetic Shutters for Formwork, Concrete Shuttering Magnets, Precast Concrete Magnetic Clamps, Prefabricate Concrete Formwork Magnets, Precast Concrete Magnet With this Magnet, wooden or steel formworks can be safely fixed to Steelmoulds or Tables. The product is delivered with integrated high-prefomance magnets with forces from 450 to 2100 kg. Integrated threads (M16) can be...

Click for more...

Prefabricate Concrete Formwork Magnets 2100KGS

Magnet description:
Magnet ID:MSS-16
SHUTTERING MAGNETS and MAGNETIC SYSTEMSrange of SHUTTERING MAGNETS and MAGNETIC SYSTEMS for the Pre-cast Concrete Industry are compact and lightweight. Thanks to the use of modern magnetic materials, Shuttering systems offer an extraordinary magnetic power compared to the minimum weight of the products themselves. The product range can be adapted for...

Click for more...

Shuttering Magnetic Systems
inquiry

Magnet description:
Magnet ID:MSS-15
Precast concrete shuttering magnet is a new magnetic assemby which is used to fix the framework in precast industry. The assembly consists of some strong neodymium magnets and steel plates which form to certain designed magnetic circuit. This magnetic circuit provides very much stronger attraction force to any ferrous workpiece. But the magnetic power is shielded and controled...

Click for more...

Magnetic Formwork System
inquiry

Magnet description:
Magnet ID:MSS-14
Magnetic Formwork System(Confortable Solution)This formwork-system, consist of a formwork-profile with integrated magnetic tension-mechanism, whichcan be used in different formworks. It is specially suitable for the production of filigran- respectively double walls and lattice girder ceilings. By mean of the tension-mechanism, the profile (layer is planed) is pulled to the...

Click for more...

Shutter Magnet
inquiry

Magnet description:
Magnet ID:MSS-13
Shutter Magnet1. We have magnet working load limit 1800kn and 2100 kn.2. The magnet mainly used for conrete pre casting shutter.3. The magnet have passed many clients' test and production usage. we got no complain about quality problem.And we can change shape or colour according to customer's...

Click for more...

Magnet description:
Magnet ID:MSS-12
This formwork-system, consist of a formwork-profile (steel) with integrated magnetic tension-mechanism, which can be used in different formworks. It is specially suitable for the production of filigran- respectively double walls and lattice girder ceilings.By mean of the tension-mechanism, the profile (layer is planed) is pulled to the bottom of the shuttering, so that an...

Click for more...

Magnetic Boxes Shuttering Magnets 2000KGS

Magnet description:
Magnet ID:MSS-11
SHUTTERING MAGNETS and MAGNETIC SYSTEMS HSMAG range of SHUTTERING MAGNETS and MAGNETIC SYSTEMS for the Pre-cast Concrete Industry are compact and lightweight. Thanks to the use of modern magnetic materials, HSMAG Shuttering systems offer an extraordinary magnetic power compared to the minimum weight of the products themselves. SHUTTERING MAGNET 2000Dimensions...

Click for more...

Prefabricate Concrete Formwork Magnets 800KGS

Magnet description:
Magnet ID:MSS-10
These products may be used, for example, as magnets for concrete formwork. APPLICATION: Attach the magnetic system at the formwork in â€žswitched offâ€œ state. Push the bolt down â€“ finished! The detach of the magnetic system is made by a prying tool (fork and handlebar) which we offer for sale, too. PRODUCT INFORMATION:Â» extremely sturdy with an outside...

Click for more...

Precast Concrete Shuttering Magnets 1000KGS

Magnet description:
Magnet ID:MSS-09
Shuttering Magnets for Pre-cast concrete formworkThe prefabricated concrete industry seeks methods of making pieces more economically and effectively. HSMAG has taken into account the needs of this sector and is developing magnetic systems to make the activity easier and more rational. Formwork magnets are light and compact thanks to the use of modern neodymium elements. This...

Click for more...

Magnet description:
Magnet ID:MSS-08
Precast Concrete Magnet with a solid welded U-profile and additional Adaptors: Adhesive Power: 600kgs, 1000kgs, 1800kgs, 2000kg adhesive power is available. The items presents the ideal platform for your rationalisation ideas for shuttering construction, both for wood as well as steel shuttering siderail. We are supplying this item with very competive price....

Click for more...

Precast Concrete Formwork Construction Magnetic Shuttering

Magnet description:
Magnet ID:MSS-07
Switchable stopper for prefabricated ceilings and double wallsHSMAG shuttering system consist of a U-profile, in which a number of magnets depending on the length. Due to a special patented design, these magnets can be activated and deactivated. In contrast to conventional systems, a button for detaching thre magnets is not necessary. The magnets â€œdisappearâ€ into...

Click for more...

Magnet description:
Magnet ID:MSS-06
HSMAG also produces accessories and adapters for the quick fixing and positioning of the different profiles which adapt perfectly to fixings of any shape or size, even in those cases where it is difficult to reach certain places, and all this with a considerable saving in time and cost of preparation. Formwork magnets are light and compact thanks to the use of modern...

Click for more...

Magnet description:
Magnet ID:MSS-05
HSMAG Precast produced shuttering magnet 450KGS/900KGS / 1800KGS /2100KGS which is a small size shuttering magnet specification for steel precast concrete platform. shuttering magnet is an ideal range of applications perfectly suitable for all kinds of precast concrete formwork construction, both for wood and steel shuttering. All shuttering magnets have extraordinarily...

Click for more...

Magnet description:
Magnet ID:MSS-04
Until recently the erection of semi-circular balcony slab shuttering took about three hours. While craftsmen spent their valuable time on erection of conventional shuttering, their managers fretted about the low added value of pre-cast component factories, ineffective utilisation of working time and too little yield. HSMAG is the first shuttering system that allows you to...

Click for more...

Precast Concrete Shuttering Magnet 700KGS

Magnet description:
Magnet ID:MSS-03
Shuttering systems, Precast Concrete Shuttering MagnetUnbeatable Combinations: HSMAG shuttering systems have proven their outstanding qualities under tough practical testing. Through an ongoing development, we have developed a modular formwork system which can be used flexibly, rapidly, safely and efficiently in every field. shuttering systems key features are:...

Click for more...

Shuttering Magnets 600KGS
inquiry

Magnet description:
Magnet ID:MSS-02
This formwork-system, consist of a formwork-profile (steel) with integrated magnetic tension-mechanism, which can be used in different formworks. It is specially suitable for the production of filigran- respectively double walls and lattice girder ceilings.By mean of the tension-mechanism, the profile (layer is planed) is pulled to the bottom of the shuttering, so that...

Click for more...

Magnetic Shutters 450KGS
inquiry

Magnet description:
Magnet ID:MSS-01
This formwork-system, consist of a formwork-profile with integrated magnetic tension-mechanism, which can be used in different formwork` s. It is specially suitable for the production of filigran- respectively double walls and lattice girder ceilings. Advantages of the System on one View: - very leight weight - simple and safe handling - simple...

Click for more...

Magnet description:
Magnet ID:HS-Pot-10
Internal Threaded Mounting with EyeletDeep Pot Magnet is one another name of internal threaded mounting Eyelet. These pot magnets are comes in red magnets and comes in regular Neodymium magnets range also. By using screws and bolts with M3, M4, M5 and M8, these pot magnets can easily be attach to any item. These magnets also exeunt with Alnico, NdFeB and SmcO formats....

Click for more...

NdFeB Pot Magnet with Hook
inquiry

Magnet description:
Magnet ID:HS-Pot-9
NdFeB Pot MagnetNdFeB Pot Magnets are best for small sized magnetic products with maximum pull strength (ideally when in direct contact with ferromagnetic e.g. mild steel surfaces). The actual pull force achieved is dependent on the surface that is being clamped onto (material type, thickness, flatness, friction levels, etc), its quality (e.g. rust free), its size (thickness...

Click for more...

Magnet description:
Magnet ID:HS-Pot-8
External Threaded StudWe at HSMAG Magnets offers pot magnets that produces increased amount of force into a material known as ferromagnetic. Coated with Ni or Zinc plated steel, these pot magnets have an improved magnetic circuit, which allows clamping forces to achieve minimal size. There are three at about four like M4, M5, M6 and M8 holes where these magnets along with some...

Click for more...

Magnet description:
Magnet ID:HS-Pot-7
Internal Threaded StudA HSMAG magnets is sole provider of pot magnets that are internally threaded stud popularly known as Internal Threaded Stud. These magnets have a very large force, which can clamp down the ferromagnetic material because of its Ni or Zinc plated mild steel. Thus, allow a magnetic circuit with improved material, which can achieved with minimal sizes.Pot...

Click for more...

Magnet description:
Magnet ID:HS-Flexible-10
rubber magnet: 1 . Excellent machinabilityFlexible magnet is enough soft to be easily bent, twisted, coiled, punched, and otherwise machined into almost any shape without loss of magnetic energy, so you can also print art words on you request and die cut by yourself. Strontium, Barium and Neodymium magnetic rolls are usually purchased for further machining purpose. 2...

Click for more...

Self-adhesive Laminated Flexible Magnetic Rolls

Magnet description:
Magnet ID:HS-Flexible-9
Flexible magnet 1.Flexible rubber magnet 2.Material: isotropic rubber magnet, UV oil, adhesive 3.Customize 4.ISO, CE self-adhesive laminated flexible magnetic sheet MaterialMagnet powder,CPE etc on Size CustomedThickness 0.012-0.394" (0.3-10mm) Width up to 31.5" (660mm) Sizeaccording to customer's requireAvailable colorPlain brown,...

Click for more...

Magnetic Receptive Sheet
inquiry

Magnet description:
Magnet ID:HS-Flexible-8
Flexible iron sheet is made by mixing iron powder with synthetic rubber or plastic (CPE etc.). It is flexible and has the characteristic of flexible magnetic sheeting. It is easily cut, bent, twisted, coiled, or be machined into almost any shape without damaging.Flexible iron sheet is not a magnet, but used to creat a magnetic receptive face. It is treated as metal base for...

Click for more...

Magnet description:
Magnet ID:HS-Flexible-7
1.Surface: without / with UV coating 2.thickness from 0.3mm-5mm 3.lamination: adhesive, art paper 4.A4 rubber magnetic sheeDescription : A4 rubber magnetic sheet Ingredient: magnet powder,CPE etc on Size: as your design Property: Isotropic and Anisotropic is avaible Color: plain brown, with adhesive laminate or vinyl PVClaminate Density: 3.8g/cm3 Shape: sheet Advantage:...

Click for more...

Magnet description:
Magnet ID:HS-Flexible-6
flexible magnetic sheet are made of ferrite magnet powder, compound rubber and other materials. By extruding, rolling or injecting, the combination can be made into soft, plastic and flexible magnets with different shapes which are depend on the request of clients. Type for flexible magnetic sheet :Isotropic material: weak magnetism, used on iceboxes, presswork and...

Click for more...

SmCo Permanent Motor Magnet
inquiry

Magnet description:
Magnet ID:HS-SmCo-10
SmCo is also named with SmCo magnetic steel, SmCo permanent magnet, SmCo permanent magnetic iron and rare-earth cobalt permanent magnet. Itâ€™s a high performance, low temperature coefficient permanent magnet with its high working temperature-350 degree centigrade. When working above 180 degree centigrade, its maximum energy product BH and steady temperature are superior...

Click for more...

Sintered SmCo Block Magnets
inquiry

Magnet description:
Magnet ID:HS-SmCo-9
1.Smco Block Magnets Kind:SmCo5 and Sm2Co17 2.Excellent coercive force 3.Excellent corrosion resistance 4.High working Temp 5.OEMSamarium Cobalt SmCo MagnetsSamarium Cobalt Smco Magnet Sm2Co17Material:Rare earth magnetic material. Sm2Co17 Grade:Samarium Cobalt Smco Magnet Sm2Co17Common Applications of SmCo Magnet :SmCo magnet possesses excellent thermal stability,...

Click for more...

SmCo Ring Magnets
inquiry

Magnet description:
Magnet ID:HS-SmCo-8
Smco MagnetsModelSmco Magnets -Sm2Co17, SmCo5Tolerance+/-0.05mm for small dimensions+/-0.1mm for common specifications+/-0.15mm for big blocksShapeDisc, Ring, Block, Segment, Cylinder, Trapezoid, Customized Design(Design proper magnets for clients specific requirements)CertificateEN71,SGSMOQ100 pcsPriceUSD0.01~10/pcLead Time5-25 daysApplications SmCo...

Click for more...

AlNiCo Pot Magnet
inquiry

Magnet description:
Magnet ID:HS-AlNiCo-10
pot alnico magnet 1.Material:aluminum,nickel,cobalt,etc 2.Shape:ring,block, cylinder, segment, arc, etc 3.Size:customizedSpecifications1.pot alnico magnets are constructed form a Cylindrical cast Alnico 5magnet ,Aluminum or Copper Ring Spacer and Mild Steel Pot2.Poles in same plane3.with threaded chentral hole in the mild steel pot for fixing 4.pot magnets have and insulated...

Click for more...

Magnet description:
Magnet ID:HS-AlNiCo-9
Cow magnets (HS code: 85051190)Cow magnets are popular with dairy farmers and veterinarians to help prevent Hardware Disease in their cattle. While grazing, cows eat everything from grass and dirt to nails, staples and bits of bailing wire (referred to as tramp iron). Tramp iron tends to lodge in the honeycombed walls of the recticulum, threatening the surrounding vital organs...

Click for more...

Magnet description:
Magnet ID:HS-AlNiCo-8
Alnico magnet,sintered alnico magnet,customized alnico magnet. a):Used in Motor,speaker. b):Max working temperature 550 degreeAlnico magnet,sintered alnico magnet,customized alnico magnet.a):Alnico magnet is made up of aluminum,nickel,cobalt and other...

Click for more...

Magnet description:
Magnet ID:NW-50-N48H
Magnetisation Grade: N48HMaterial: Neodymium-Iron-Boron (NdFeB, NIB) Magnet ID: NW-50-N48H Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy ...

Click for more...

Cone Neodymium Magnet
inquiry

Magnet description:
Magnet ID:NCN-8156-N40
Magnetisation Grade: N40Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NCN-8156-N40 Plating / Coating: Nickel (Ni-Cu-Ni) / Double NiShape: Cone Cone Magnet Size: Cone Total Top...

Click for more...

Magnet description:
Magnet ID:NNC-8-N38-Ni
Magnetisation Grade: N38Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NNC-8-N38-Ni Color / Coating: orange, red, black, gray, metallic, gold, silver, purple, blue ...

Click for more...

Magnet description:
Magnet ID:NNC-7-N35-gold
Magnetisation Grade: N35Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NNC-7-N35-gold Color / Coating: orange, red, black, gray, metallic, gold, silver, purple, blue ...

Click for more...

Magnet description:
Magnet ID:NNC-6-N38-metallic
Magnetisation Grade: N38Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NNC-6-N38-metallic Color / Coating: orange, red, black, gray, metallic, gold, silver, purple, blue ...

Click for more...

Magnetic Buckyball Nanodots
inquiry

Magnet description:
Magnet ID:NNC-5-N35-blue
Magnetisation Grade: N35Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NNC-5-N35-blue Color / Coating: orange, red, black, gray, metallic, gold, silver, purple, blue ...

Click for more...

Magnet description:
Magnet ID:NNC-5-N35-silver
Magnetisation Grade: N35Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NNC-5-N35-silver Color / Coating: orange, red, black, gray, metallic, gold, silver, purple, blue ...

Click for more...

Magnet description:
Magnet ID:NNC-5-N35-gray
Magnetisation Grade: N35Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NNC-5-N35-gray Color / Coating: orange, red, black, gray, metallic, gold, silver, purple, blue ...

Click for more...

Magnet description:
Magnet ID:NNC-5-N35-gold
Magnetisation Grade: N35Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NNC-5-N35-gold Color / Coating: orange, red, black, gray, metallic, gold, silver, purple, blue ...

Click for more...

Magnet description:
Magnet ID:NC-20-N52
Magnetisation Grade: N52Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NC-20-N52 Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy ...

Click for more...

Strong Cuboid Cubemagnet
inquiry

Magnet description:
Magnet ID:NC-15-N48
Magnetisation Grade: N48Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NC-15-N48 Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy ...

Click for more...

Golden Coating Ndfeb Cube
inquiry

Magnet description:
Magnet ID:NC-12-N50-G
Magnetisation Grade: N50Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NC-12-N50-G Plating / Coating: Golden / Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy ...

Click for more...

Neo Cube
inquiry

Magnet description:
Magnet ID:NC-10-N38
Magnetisation Grade: N38Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NC-10-N38 Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy ...

Click for more...

Magnet description:
Magnet ID:ND-12030-N40
Magnetisation Grade: N40Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: ND-12030-N40 Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy (Black/Gray) ...

Click for more...

Magnet description:
Magnet ID:ND-10060-N42
Magnetisation Grade: N42Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: ND-10060-N42 Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy (Black/Gray) ...

Click for more...

Large Disc Permanent Magnet
inquiry

Magnet description:
Magnet ID:ND-9030-N45
Magnetisation Grade: N45Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: ND-9030-N45 Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy (Black/Gray) ...

Click for more...

Huge NdFeB Disc Magnet
inquiry

Magnet description:
Magnet ID:ND-8555-N48
Magnetisation Grade: N48Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: ND-8555-N48 Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy (Black/Gray) ...

Click for more...

Magnet description:
Magnet ID:NB-100103-N48-Ni
Magnetisation Grade: N48Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NB-100103-N48-Ni Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy ...

Click for more...

Huge Block NdFeB Magnet
inquiry

Magnet description:
Magnet ID:NB-90807-N38SH-Ni
Magnetisation Grade: N38SHMaterial: Neodymium-Iron-Boron (NdFeB) Magnet ID: NB-90807-N38SH-Ni Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy ...

Click for more...

Magnet description:
Magnet ID:NB-803010-N38H-Ni
Magnetisation Grade: N38HMaterial: Neodymium-Iron-Boron (NdFeB) Magnet ID: NB-803010-N38H-Ni Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy ...

Click for more...

Magnet description:
Magnet ID:NB-707020-N33H-Ni
Magnetisation Grade: N33HMaterial: Neodymium-Iron-Boron (NdFeB) Magnet ID: NB-707020-N33H-Ni Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy ...

Click for more...

Permanent Block Magnet
inquiry

Magnet description:
Magnet ID:NB-60104-N42M-Ni
Magnetisation Grade: N42MMaterial: Neodymium-Iron-Boron (NdFeB) Magnet ID: NB-60104-N42M-Ni Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy ...

Click for more...

Magnet description:
Magnet ID:NB-704010-N38-Ni
Magnetisation Grade: N38Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NB-704010-N38-Ni Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy ...

Click for more...

Magnet description:
Magnet ID:NB-502010-N40-Ni
Magnetisation Grade: N40Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NB-502010-N40-Ni Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy ...

Click for more...

AC Synchronous Electric BLDC Motor Magnet

Magnet description:
Magnet ID:AMM-7
1. Certification:TS16949 2. Strong demagnetization 3. Grade: N35-N52,M,H,SH,UH,EHAC Synchronous Electric BLDC Motor Magnet 1) Ndfeb arc or segment magnet has superior magnetic properties than other magnets2) Higher unit magnetic properties 3) Smaller size and lighter weight in designing devices4) Mostly an iron based alloy, NdFeB type rare earth magnet is much more prone...

Click for more...

Magnet description:
Magnet ID:AMM-6
AC MOTOR generator magnet 1. Certification:TS16949 2. Strong demagnetization 3. Grade: N35-N52,M,H,SH,UH,EHWedge wind generator magnet1) Ndfeb arc or segment magnet has superior magnetic properties than other magnets2) Higher unit magnetic properties 3) Smaller size and lighter weight in designing devices4) Mostly an iron based alloy, NdFeB type rare earth magnet is...

Click for more...

Magnet description:
Magnet ID:AMM-5
Surface treatment: zinc, nickel, Ni + Cu + Ni, epoxy, parylene, zinc + parylene, NI+Cu+Ni+epxoyMaterial grades: N35 to N52, N44SH, N40UH, N38EH and N30AHBr: 14.2kGs maximumHcj: 35kOe maximumBH: 54MGOe maximumMaximum working temperature: 80 to 230Â°CThickness of oriented dimension: 70 to 80mm maximumMagnetization: axially, 2, 4 or multi-pole, diametric and radial...

Click for more...

Micro Precision Motor Permanent Ndfeb Magnet

Magnet description:
Magnet ID:MMM-7
Micro Motor Magnet applications:loudspeakers,motor assemblies,windmill,Home appliance,acousics,communication equipment,toy,car,servomotor,step motor,DC motor and linear motor,mircrophonesPros: Very strong hold when contacting another magnet or plain iron, very difficult to pull away (easy to slide however). Pretty strong hold between two of these even with a couple of mm in...

Click for more...

Magnet description:
Magnet ID:MMM-6
HangSeng utilizes new sintered NdFeB magnets techniques and equipment such as Strip Casting, HDDR (Hydrogenation Disproportionation Desorption Recombination) technology to make many different grades of NdFeB magnets from N,H,SH,UH and EH grade ,(BH)max from 33-51 MGOe, maximum working temperature up to 230 Degrees Centigrade. All the products are manufactured according to the...

Click for more...

Neodymium Permanent Magnets for Stepping Motors

Magnet description:
Magnet ID:SMM-7
Permanent neodymium magnet Arcs for stepper motor Specifications:1.ISO9001:2008 and SGS,ROHS certificates system, 2.Typical Coat: Ni, Ni-Cu-Ni, Zn, Tin, Epoxy, Ni-Ag, Ni-Au, etc.Grade Available:N35-N52 working temperature: 80Â°C30M-45M, 50M working temperature: 100Â°C 30H-48H working temperature: 120Â°C30SH-45SH working temperature: 150Â°C 28UH-40UH working...

Click for more...

Magnet description:
Magnet ID:SMM-6
Permanent neodymium magnet Specifications:1.ISO9001:2008 and SGS,ROHS certificates system, 2.Typical Coat: Ni, Ni-Cu-Ni, Zn, Tin, Epoxy, Ni-Ag, Ni-Au, etc.Grade Available:N35-N52 working temperature: 80Â°C30M-45M, 50M working temperature: 100Â°C 30H-48H working temperature: 120Â°C30SH-45SH working temperature: 150Â°C 28UH-40UH working temperature: 180Â°C28EH-38EH...

Click for more...

High Performance Brushless Motor Magnets

Magnet description:
Magnet ID:BMM-10
Neodymium sintered magnets (Nd-Fe-B), NdFeB MagnetFrom among the group of modern magnets of rare earth-metal (Re-M) type, neodymium sintered magnets (Nd-Fe-B) achieved the biggest market success. They owe their excellent magnetic properties to Nd2Fe14B compound, discovered in 1984. The very magnets are manufactured using methods of powder metallurgy, and thanks to pressing in...

Click for more...

Permanent NdFeB DC Brushless Motor Magnets

Magnet description:
Magnet ID:BMM-9
Features of Sintered NdFeB Magnet:Moderate temperature stability; Extremely resistance to demagnetization. Excellent strength value. Advanced Technology. Effective surface treatment to prevent corrosion. High resistance to demagnetization; Excellent cost to performance ratio; Reasonable temperature stability; Not suitable for application which exposed in high temperature...

Click for more...

BLPM Motor Rotor Magnet
inquiry

Magnet description:
Magnet ID:BMM-8
We are a professional magnet manufacturer. We can produce all kinds of magnet, such as NdFeB magnet, Neodymium magnets, motor magnet, rare earth magnets and so on. We can also do a new product according to customers' design and provide excellent technical support for a new project. Application: Sintered Rotator NdFeB magnets are generally used for motors, speakers, toys and...

Click for more...

NdFeB Permanent Magnets for Brushless Motor

Magnet description:
Magnet ID:BMM-7
Standard Programme of Permanent MagnetsThe standard programme of permanent magnets consists of sintered neodymium magnets (NdFeB), sintered samarium cobalt magnets (SmCo) and ferrite magnets (SrFe).The magnets can be supplied under favourable terms. For information on types, dimensions, quantities, prices etc. please contact us.Please notice: When ordering standard magnets, an...

Click for more...

Magnet description:
Magnet ID:BMM-6
Permanent Magnets - ApplicationsFor special applications, e.g. in the event of direct contact with water, it may be necessary to apply a surface treatment to certain types of magnets.We provide different options for surface treatment such as nickel, zinc and epoxy, or alternatively complete enclosure in stainless steel.The potential applications for magnets are endless, but...

Click for more...

Magnet description:
Magnet ID:NdFeB-Segment-40
HangSeng MagTech aims at our customersâ€™ satisfaction, a respect to people, society and environment, we clearly know â€œQuality is the prerequisite for long-term successâ€. Quality is life, which is declarad in the corporate strategy and quality policy of HangSeng MagTech.We cooperate with SGS and CAS Institute of Physics in magnet production and Certified by...

Click for more...

NdFeB Magnet for Elevator N35H Arc Tile Segment

Magnet description:
Magnet ID:NdFeB-Segment-39
HangSeng MagTech, as the leading magnet manufacturer ,currently offers various magnet and magnetic solutions , including :NdFeB Magnet: Servo motor, Step motor, Brushless Motor, Texture Motor, Vibration Motor, Generator ,VCM ,Pump, special Motor, Wind energy, lifter, speaker, Magnetic Switch , Flow Mere. CDDVD-ROM, watt-hour meter, NMR , Medical devices, separator, Sensor,...

Click for more...

Magnet description:
Magnet ID:NdFeB-Segment-38
For DC electromagnet, we often use low carbon steel for the core and yoke because of its low cost and high saturation magnetization. CoFe alloy has the highest saturation magnetization among ferromagnetic materials and can considered when tight space or low weight is required.For AC electromagnet, we often use high resistance, low coercivity material for the core and yoke such...

Click for more...

Magnet description:
Magnet ID:NdFeB-Segment-37
Material: neodymium iron boronProduct dimensions: 2.8 x 2.5 x 0.2 inchesGrade: N38SH Plated in nickel-copper-nickel for a shiny corrosion resistant finishHigh quality, competitive price, best serviceComposed of strontium carbonate and iron oxideLeast expensive material compared to alnico and rare earth magnetsHigh-intrinsic coercive forceSimple shapes (only due to...

Click for more...

Magnet description:
Magnet ID:NdFeB-Segment-36
ElectromagnetsCopper Wire (insulation application dependent)Permanent MagnetsNd-Fe-B â€“ Highest Strength/volume, moderate cost., moderate temperature extremes (150Â°C),Sm-Co â€“ High Strength/volume, highest cost, high temperature extremes (300Â°C)Ceramic â€“ Low Strength/volume, lowest cost, high temperature extremes (300Â°C)Alnico â€“ Moderate to...

Click for more...

Magnet description:
Magnet ID:NdFeB-Segment-35
Neodymium Iron BoronMagnetrons produced from Nd-Fe-B provide the â€œbiggest bang for the buckâ€. This is the strongest grade of magnetic material and well is well suited for magnetron design and construction. It is prone to corrosion, however, when submersed in liquids. As such, for magnetrons exposed to the cooling media, either a hermetic seal will...

Click for more...

Arc Neodymium Magnet For Motor Zinc Coating

Magnet description:
Magnet ID:NdFeB-Segment-34
Main Application of Nd-Fe-B MagnetMicro-Special-MotorVoice Coil Motor(VCM)StepmotorTexture MotorGeared Down MotorDisk MotorServomotorPermanent-Dynamic SystemGeneratorMagnetic AssemblyMagnetic ClampMagnetic CraneMagner FilterMagnetic ClunchPetroleum Dewaxing EguipmentMagnetic CouplerMagnetic SwitchWater MagnetizerElectric Acoustic...

Click for more...

Magnet description:
Magnet ID:HS-Lifter-J-Series
Model Rated lifting strength(Kgf) Cylindrical lifting strength(Kgf) Max.pull-off strength(Kgf) L B H R Operation temperature(â„ƒ) Dead...

Click for more...

Lifting Permanent Magnet
inquiry

Magnet description:
Magnet ID:HS-Lifter-I-Series
Model Rated lifting strength(Kgf) Cylindrical lifting strength(Kgf) Max.pull-off strength(Kgf) L B H R Operation temperature(â„ƒ) Dead...

Click for more...

Magnet description:
Magnet ID:HS-Lifter-E-Series
Model Rated lifting strength(Kgf) Cylindrical lifting strength(Kgf) Max.pull-off strength(Kgf) L B H R Operation temperature(â„ƒ) Dead...

Click for more...

Magnet description:
Magnet ID:HS-NdFeB-10
Extra strong (N35) magnets. These magnets are often used by model airplane builders. Heat resistant up to 80 degrees Celsius. NdFeB Magnetic mainly comprised of neodymium, iron and boron, is the third generation of the rare-earth permanent magnets, Sintered NdFeB is the strongest permanent magnets in the world up to date, It has excellent properties of high remanence,...

Click for more...

Magnet description:
Magnet ID:HS-NdFeB-09
Disc neodymuim magnets,permanent rare earth neodymuim magnets,sintered permanent neodymuim magnets,ball neodymuim magnets1.Material: Sintered Neodymium-Iron-Boron.2.Size: It will be different according to client's requirement;3. Magnetic property: From N35 to N52, 35M to 50M, 35H t 48H, 33SH to 45SH, 30UH to 40UH, 30EH to 38EH;we are able to manufacture the full range of...

Click for more...

Magnet description:
Magnet ID:HS-NdFeB-08
Rare Earth Sintered NdFeB magnet 1)The only qualified supplier of Schneider in China 2)Strong magnetic force 3)Wide applicationRare Earth Bonded NdFeB magnet Magnetic Feature:1) Material: Sintered Neodymium-Iron-Boron;2) Temperature: the max operation temp is up to 200 degree centigrade or 380 curie temperature;3) Grade:N33-N52,33M-48M,33H-48H,30SH-45SH,30UH-38UH and...

Click for more...

Magnet description:
Magnet ID:HS-NdFeB-07
Neodymium Magnet Feature:Neodymium-iron-boron magnet is one kind of the permanent magnets.Magnet N-( N35, N38, N40, N42, N45, N48, N50, N52),Magnet M-(35M, 38M, 40M, 42M, 45M, 48M, N50M),Magnet H-(35H, 38H, 40H, 42H, 45H, N48H),Magnet SH-(30SH, 33SH, 35SH, 38SH, 40SH, 42SH, N45SH),Magnet UH-( 28UH, 30UH, 33UH, 35UH, 38UH),Magnet EH-(28EH, 30EH, 30EH, 33EH, 35EH)Rod Magnet...

Click for more...

NdFeB Motor Magnets
inquiry

Magnet description:
Magnet ID:HS-NdFeB-06
...

Click for more...

NdFeB Permanent Arc Magnet
inquiry

Magnet description:
Magnet ID:HS-NdFeB-05
Our factory produce and manufacture ndfeb magnets according to customerâ€™s design on shape, dimension, grades, coatings etc.To offer you our Cylinder magnets price,please offer the following details :Magnets grade :from N35 To N54 ,from N Series to UH Series.Magnets size : Outer Diameter,Inner Diameter,ThicknessMagnetism direction :which direction to oriented The north...

Click for more...

N35SH NdFeB Segment Magnet
inquiry

Magnet description:
Magnet ID:HS-NdFeB-04
DISC neodymuim magnets, DISK permanent rare earth neodymuim magnets, sintered NDFEB permanent neodymuim magnets,ball neodymuim1.Material: Sintered Neodymium-Iron-Boron.2.Size: It will be different according to client's requirement;3. Magnetic property.4. Coating: Zn, Nickle, silver, gold, epoxy and so on.5. Advantage:a. Chemical Composition: Nd2Fe14B: Neodymium magnets are...

Click for more...

Block Wind Turbine Generator NdFeB Magnet

Magnet description:
Magnet ID:HS-NdFeB-03
Sintered block Shape Wind Turbine Generator Magnet, NdFeB generators magnets Magnetic Feature:1) Material: Neodymium-Iron-Boron;2) Temperature: the max operation temp is up to 200 degree centigrade or 380 curie temperature;3) Grade:N33-N52,33M-48M,33H-48H,30SH-45SH,30UH-38UH and 30EH-35EH;4) Shape: ring,block,disc,bar and so on;5) Size: according to customers' request;6)...

Click for more...

N52 NdFeB Block Magnet
inquiry

Magnet description:
Magnet ID:HS-NdFeB-02
1. high quality consistency 2. max continuous working temperature 3. low weight loss 4. sst-up to 500hoursSintered NdFeb Magnet / Magnet Productswe specialize in manufacturing sintered NdFeB with highest quality requirement. We enphasize after-sales service as important as products quality.We quote the best price from factory. Grade N33, N35, N38, N40, N42 Various sizes...

Click for more...

NdFeB Magnets
inquiry

Magnet description:
Magnet ID:HS-NdFeB-01
Extra strong (N35) magnets. These magnets are often used by model airplane builders. Heat resistant up to 80 degrees Celsius. NdFeB Magnetic mainly comprised of neodymium, iron and boron, is the third generation of the rare-earth permanent magnets, Sintered NdFeB is the strongest permanent magnets in the world up to date, It has excellent properties of high remanence,...

Click for more...

Magnet description:
Magnet ID:Magnet Assemblies-6
Sandwich Assembly FeaturesA ceramic magnet is "sandwiched" between two plated steel pole pieces to form a powerful latch magnet assembly held together by glue or rivets. Holding and pull strengthMagnetic assemblies are up to 32 times stronger than magnets by themselves. Pull strength is tested on a flat steel plate 1/2 inch thick. The pull may vary depending on the surface it...

Click for more...

Magnet description:
Magnet ID:Magnet Assemblies-5
Magnet Latch FeaturesAdams magnetic latches provide diverse installation options and can replace standard latch hardware on doors, for a cleaner look and smoother operation. Magnetic latches can hold metal doors or to steel strikers attached to non-metallic surfaces. Snap-in designs install quickly in a single mounting hole. Separate screw-mount or adhesive-mount steel...

Click for more...

Magnet description:
Magnet ID:Magnet Assemblies-4
Round and Rectangular Flat-Faced Electromagnets are available in a variety of sizes. Flat-Faced magnets should only be used on flat, smooth material where the entire magnet face is in contact. They can be used in manually operated or automated applications.Magnets listed utilize 12 volt D.C. current (24VDC and 110VDC are available by request).Standard Leads are 24"Dimensions...

Click for more...

Sandwich Assembly Magnets
inquiry

Magnet description:
Magnet ID:Magnet Assemblies-3
Sandwich Assembly FeaturesA ceramic magnet is "sandwiched" between two plated steel pole pieces to form a powerful latch magnet assembly held together by glue or rivets. Holding and pull strengthMagnetic assemblies are up to 32 times stronger than magnets by themselves. Pull strength is tested on a flat steel plate 1/2 inch thick. The pull may vary depending on the surface it...

Click for more...

Magnet description:
Magnet ID:Magnet Assemblies-2
Channel Magnet FeaturesThese rectangular base magnets channel great holding strength onto one large surface. A strong ceramic or rubber magnet is set into a plated steel channel with holes, loops or threaded nuts for mounting. Common applications? Door latches ? Vehicle license plate holders ? Blue print holders ? Sign and banner holders Holding and pull strengthChannel...

Click for more...

Magnet description:
Magnet ID:Magnet Assemblies-1
Round Base FeaturesAdams round base magnet assemblies are made with either ceramic or neodymium magnets combined with steel cups. The magnets are magnetized together with the casings to create a holding force that is significantly stronger than an individual magnet. We can easily attach hooks, knobs, PEMs or other fasteners to accommodate your specific holding requirements. We...

Click for more...

U-shaped Horseshoe Ferrite Magnet for Education

Magnet description:
Magnet ID:HS-Ferrite-10
1.Material:Ferrite Permanent Magnet 2.Certificate:ISO9001 3.Accept small quantity order 4.High quality with Low costGrade y30 U-shaped Horseshoe Ferrite Magnet for Education Delivery time:Sample lead time:5-8days;Lead time: 15-18days after confirm order;Material:Permanent MagnetU-shaped Horseshoe Ferrite Magnet for Education,Rare earth magnetShape:Ring, Disk, Block, segment,...

Click for more...

Magnet description:
Magnet ID:HS-Ferrite-9
Ring Isotropic Ferrite Magnet: (1).high working temperature (2).steady property (3).reasonable priceModel Number: Y35-Y40,Y30-35BH,Y30-35HType: PermanentComposite: Ferrite MagnetShape: ring Application: Moto MagnetLarge Isotropic Ferrite Magnet Br: 380-400TLarge Isotropic Ferrite Magnet Hcb: 224-240kA/mLarge Isotropic Ferrite Magnet...

Click for more...

Magnet description:
Magnet ID:HS-Ferrite-8
Ferrite Isotropic Ferrite Magnet: (1).high working temperature (2).steady property (3).reasonable priceModel Number: Y35-Y40,Y30-35BH,Y30-35HType: PermanentComposite: Ferrite MagnetShape: arc,segmentApplication: Moto MagnetLarge Isotropic Ferrite Magnet Br: 380-400TLarge Isotropic Ferrite Magnet Hcb: 224-240kA/mLarge Isotropic Ferrite Magnet...

Click for more...

Ring Tube Permanent Ferrite Magnet for Rotor

Magnet description:
Magnet ID:HS-Ferrite-7
1.Material:Ferrite Permanent Magnet 2.Certificate:ISO9001 3.Accept small quantity order 4.High quality with Low costGrade y30 Ferrite Magnet Delivery time:Sample lead time:5-8days;Lead time: 15-18days after confirm order;Material:Permanent MagnetFerrite Magnet,Rare earth magnetShape:Ring, Disk, Block, segment, ball,cylinder andAs the request of clientsSpecification:1.Low...

Click for more...

Magnet description:
Magnet ID:HS-Ferrite-6
Y35 Y30bh Ferrite Magnets 1) High quality Ferrite materials 2) Customized package are available 3) Fast and good deliveryY30bh Ferrite Magnets Specificationsferrite magnetWhat is Ferrite?Ferrite magnet belong to sintering permanent magnet materials. It composed of Ba and SrFe. This magnetic materials can resist demagnetization and have advantage in low cost. Ferrite magnet is...

Click for more...

Magnet description:
Magnet ID:HS-Ferrite-5
1).Hard ferrite magnet 2).Custom-made dimension 3).Grades:Y30,Y30BH,C1,C8 and so on 4).Certificate:ISO9001:2008Hard ferrite magnets1. Material: Ferrite (Ceramic)2. Shape: customized3. Size: Custom-made dimension4. Grade: Y30, Y30BH, Y35, C5, C8, C10 and so on.5. Coating: None or CustomizedDetail Features of product:1) Low cost2) High corrosion resistance3) High working...

Click for more...

Magnet description:
Magnet ID:HS-Ferrite-4
Sintered ferrite magnet 1.Good magnetic property and quality 2.Shapes and Sizes as per request 3.Welcome customized ordersSintered Hard Ferrite Magnet/sintered ferrite magnet/hard ferriteGeneral Introduction 1, We specialize in manufacturing high performance sintered ferrite magnets in China. 2, The quality and characteristics of our sintered ferrite...

Click for more...

Rod Cylinder Disc Ferrite Ceramic Magnet

Magnet description:
Magnet ID:HS-Ferrite-3
China manufacturer Y35 ceramic barium ferrite magnet 1.hard ferrite magnet 2. High Cpercive Force 3. 80-200 centigrade work Specification of China manufacturer Y35 ceramic barium ferrite magnet :Ferrite or ceramic magnets are still the most widely used magnets with a maximum energy product of 1 to Â± 4.3 MGOe. Due to the environmental requirements which are becoming more...

Click for more...

Magnet description:
Magnet ID:HS-Ferrite-2
1).Hard ferrite disc magnet 2).Custom-made dimension 3).Grades:Y30,Y30BH,C1,C8 and so on 4).Certificate:ISO9001:2008 Hard ferrite magnets 1. Material: Ferrite (Ceramic) 2. Shape: customized 3. Size: Custom-made dimension 4. Grade: Y30, Y30BH, Y35, C5, C8, C10 and so on. 5. Coating: None or Customized Detail Features of product: 1) Low cost 2) High corrosion resistance 3) High...

Click for more...

Magnet description:
Magnet ID:HS-Ferrite-1
ring ferrite magnet Material:Ferrite For DC motor High flexible Hard ferrite or Ceramic Magnethigh flexible block ferrite magnet Best choice for ferrite magnet : Ferrite permanent magnets / hard magnets /Ceramic magnets --- the first choice for most types of DC motors, magnetic separators, magnetic resonance imaging and automotive sensors. About ferrite magnets1.Hard ferrite...

Click for more...

Magnet description:
Magnet ID:Radial-Ring-20
SINTERED NDFEB MAGNETS, High Powerful Ring Tube Radial MagnetMaterial : Neodymium-Iron-BoronMagnet Shape Disc, Cylinder, Block, Ring, Countersunk, Segment, Trapezoid, Irregular shapes and more. Customized shapes for Sintered NdFeB Magnet are available.Magnet CoatingNi-Cu-Ni, Nickel, Zn, Gold, Silver, Copper, Epoxy, Chemical, PTFE, Parylene, Everlube, Passivation and more.Our...

Click for more...

NdFeB Permanent Cone Magnet
inquiry

Magnet description:
Magnet ID:NCN-15208-N45
Magnetisation Grade: N45Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NCN-15208-N45 Plating / Coating: Nickel (Ni-Cu-Ni) Shape: Cone Cone Magnet...

Click for more...

Magnet description:
Magnet ID:NCN-242-N42-G
Magnetisation Grade: N42Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NCN-242-N42-G Plating / Coating: Gold (Au) Shape: Cone Cone Magnet Size: Cone...

Click for more...

Permanent Neo Tube N42
inquiry

Magnet description:
Magnet ID:NT-503070-N42
Magnetisation Grade: N42Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NT-503070-N42 Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy (Black/Gray) / Gold (Au) ...

Click for more...

Magnet description:
Magnet ID:NT-401555-N48
Magnetisation Grade: N48Material: Neodymium-Iron-Boron (NdFeB) Magnet ID: NT-401555-N48 Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy (Black/Gray) / Gold (Au) ...

Click for more...

Super Strong Tube Magnet
inquiry

Magnet description:
Magnet ID:NT-361872-N50M
Magnetisation Grade: N50MMaterial: Neodymium-Iron-Boron (NdFeB) Magnet ID: NT-361872-N50M Plating / Coating: Nickel (Ni-Cu-Ni) / Double Ni / Zinc (Zn) / Epoxy (Black/Gray) / Gold (Au) ...

Click for more...

Magnet Catalogues

Contact Us

Magnet Infos & FAQ

Lastest MagNews

Subscribe to Newsletter

Costomer Account

N35SH Disc Magnets for Rotary Position Sensors

D8x2.5mm Diametral Disc Magnet N35H for Sensor

Thin NdFeB Axial Magnet for linear position sensor

Plastic Bonded Strontium Ferrite Multipole Ring Magnet 72 poles for Sensor

Sensor Ceramic Magnetic Multipole Ring 1.0mm pole length, 128 poles

Sensor Ferrite Multipole Ring Magnet Pole Length 2.0 mm 44 Poles

Li Ferrite Material Series Microwave Ferrite

Ni (Nickel Spinels) Ferrite High Power Material Series Microwave Ferrite

Ni Ferrite Material Series Microwave Ferrite

General Garnet Material Series Microwave Ferrite

Narrow Linewidth Garnet Material Series Microwave Ferrite

Cobalt & Holmium Doped Garnets

Gadolinum Substituted Garnets

Aluminum Gadolinium Substituted Garnets

Magnesium Spinels Microwave Ferrite

Nickel (Ni) Spinels Microwave Ferrite

Narrow Linewidth Microwave Ferrite

Lithium (Li) Spinels Microwave Ferrite

Plastic Cap Magnets in Ferrite, Rectangular Yellow

Rectangular Red Plastic Covered Ferrite Magnets

Black Rectangular Plastic Cap Magnets in Ferrite

Green Rectangular Plastic Covered Ferrite Magnets

White Plastic Coated Rectangular Ceramic / Ferrite Magnet

Refrigerator Fridge Whiteboard Ferrite Magnetic Bar Blue

Red and Blue Cylindrical Bar Magnets with Plastic Coating

Red/Green Plastic Covered Ceramic Magnetic Blocks (Regular or Jumbo)

Red and Blue Plastic Covered Bar Magnets

High Power Memo Board / Whiteboard / Glassboard / Refrigerator Magnets

High Powerful Notice / Planning Board Neodymium Magnets

Red & Green Plastic Coated Neodymium Rare Earth Magnet

Red and Black Plastic Coating Round Neodymium Magnet

White Plastic Coated Disc Round Magnets

Red Plastic Covered Round Neodymium Magnet

Blue Plastic Coated Disc Neodymium Magnet

Green Plastic Coated Disc Neodymium Magnet

Plastic Coating Disc Yellow Strong Neodymium Magnet

Plastic Coated Black Neodymium Disc Magnets

Polished Alnico 5 Pickup Humbucker Bar Magnet

Vintage Rough Pickups Alnico 5 Bar Magnets

Unoriented Alnico 5 Rough Surface Bar Magnets

Unpolished Rough Sand Cast Alnico 8 Bar Humbucker Magnets

Rough Cast or Vingate PAF Alnico Bar Magnets

Polished Guitar Pickup Alnico Bar Humbucker Magnets

Magnet Spacers for Humbucker or P90 Pickup

AlNiCo Bar Permanent Magnet for Firebird Mini Humbucker Pickup

Mini Humbucker Pickups Fully Magnetized Alnico Bar Magnet

Bar Magnet for Firebird Mini Humbucker

Ceramic C8 Bar Magnets for Guitar Humbucker / P90 Pickup

Ceramic 8 Guitar Pickup Bar Magnets

C8 Polished Bar Ceramic Magnets

Computer Hard Disk Drive Magnets

Hard Disk Head Actuator NdFeB Magnetic Aassembly

Hard Disk Actuator Magnet

Hard Disk Drive Permanent Magnet Assembly

Hard Drive Magnet Assembly

Magnetic Pulley

Permanent Magnetic Pulleys

Magnetic Head Pulley

Magnetic Pulley Separator

Magnetic Drum Pulley

Magnetic Head Roller

Permanent Magnetic Drum

Magnetic Drum Separators

Magnetic Drum Roller

Half Magnetic Drum

Customized Permanent Magnetic Plates

Plate Magnets

Magnetic Chute (Hammer Mill Plate Magnet)

Overhead Plate Conveyor Magnets

Suspension Magnet

Tapered Step Face Magnetic Plates

Suspended Plate Magnet

Spout Plate Magnets

Exposed Pole Plate Magnet