These products may be used, for example, as magnets for concrete formwork.
APPLICATION:
 Attach the magnetic system at the formwork in „switched off“ state. Push the bolt down – finished! The detach of the magnetic system is made by a prying tool (fork and handlebar) which we offer for sale, too.
PRODUCT INFORMATION:
» extremely sturdy with an outside steel housing made of 5mm thick steel
» inside with a stainless steel housing, 5 mm thick
» easy handling, „switch on“ by pushing down the bolt
» high, solid holding force
» 4 mounting threads at the longitudinal edge
* The forces have been determined at room temperature on a plate in polished steel (S235JR according to DIN 10 025) with a thickness of 10 mm (1kg ~ 10N). A maximum deviation of -10% compared to the specified value is possible in exceptional cases. Value is exceeded in general. Depending on the type of application (installation situation, temperatures, counter anchor etc.) the forces can be influenced enormously. The indicated values are serving as an orientation. Please get advice and help from our experts.