Features:
 Minimum consumption of energy:
Electro Permanent Lifting magnets are battery powered, but use the battery power 1 second only to attract or release a load. They don't need any battery power after activated. The battery can work for 300 operation cycles: HS MAG - Auto Full MAG - HSMAG.

 Convenient control:
Electro Permanent Lifting magnets are operated at its front panel, or at the Remote Control.

 Double Magnetizations:
 After clicking the button of  MAG, the first and a partial magnetization is processed and therefore a partial lifting capacity is achieved when Electro Permanent Lifting magnet and the load at floor. While Electro Permanent Lifting magnet begins to be lifted up (or the hoisting rope has a tension of 200 lbs) the second and a full magnetization is processed automatically and  Electro Permanent Lifting magnet then has its full lifting capacity. This makes a bigger margin of safety.

 Double lock of Demagnetization:
 Electronic and mechanic lock systems prohibit releasing the load while the Electro Permanent Lifting magnet and the load are lifted from the floor.

HSMAG in safe operation:
 For more safety, you have to click both the button of HSMAG and the button of UNLOCK HSMAG simultaneously to demagnetize Electro Permanent Lifting magnet and release loads.

 Lifting capacity can be adjusted:
 Adjust the lifting capacity to 3 levels: MAX, MID and MIN by turning the knob of ADJUST LIFT CAPACITY.  In case EP-B Electro Permanent Lifting magnet lifts more than one steel sheet at the same time, you can adjust its lifting capacity to a weak level in order to lift one sheet only.