Usually, Half-Hump Magnet is used where Hump Magnets doesn’t fit due to height restriction. Ideal for ferrous tramp metal separation in gravity systems, Hump Magnet separators are adaptable to either round pipe or rectangular chute transfer lines.
The Hump magnet employs two heavy duty diverter-equipped Spout Magnets, which are positioned so that the offset flow of product flowing through the hump is forced into the magnetic fields. The hinged magnets are gasketed and clamped tightly to the hump housing for maximum product and dust containment during processing operations. They also swing open for easy removal of captured tramp metal.
Features:
1. Single hump systems are used where height is an issue and can only fit a single unit.
2. Using high strength Rare Earth or Ferrite magnet material ensures the contamination is pulled to the magnet’s surface, securing the contamination.
3. One or two catchment strips are fully welded to the magnet’s face, for small to fine contamination to hide behind, helping to eliminate the possible contamination wash off from the continuous product flow.
4. 304/316 stainless steel used.
5. Industrial & food/dairy grades available.
6. The plate magnets are hinged so cleaning is done outside the enclosed chute.
Quotation Requirements:
1. Inlet/outlet flange sizes and requirements.
2. Product type, product consistency, product flow rates and product temperature.
Ruggedly constructed from stainless steel with a welded flange mounting system to fit either chute or pipe applications, Hump separators are available in nine standard sizes with Custom sizes available upon request.
Ferrite / Ceramic Hump Magnets
Part NO. |
Dimension(mm) |
Weight(Kg) | ||||
A |
B |
C |
D |
E | ||
MS-FHM120 |
120 |
150 |
470 |
170 |
200 |
30 |
MS-FHM150 |
150 |
178 |
750 |
250 |
220 |
40 |
MS-FHM200 |
200 |
178 |
750 |
300 |
220 |
48 |
MS-FHM250 |
250 |
178 |
750 |
350 |
220 |
56 |
MS-FHM300 |
300 |
178 |
750 |
400 |
220 |
60 |
MS-FHM350 |
350 |
200 |
1110 |
450 |
300 |
80 |
MS-FHM400 |
400 |
200 |
1110 |
500 |
300 |
100 |
MS-FHM450 |
450 |
200 |
1110 |
550 |
300 |
120 |
MS-FHM500 |
500 |
200 |
1110 |
600 |
300 |
140 |
NdFeB Hump Magnets
Part NO. |
Dimension(mm) |
Weight(Kg) | ||||
A |
B |
C |
D |
E | ||
MS-NHM120 |
120 |
150 |
470 |
170 |
200 |
36 |
MS-NHM150 |
150 |
178 |
750 |
250 |
220 |
43 |
MS-NHM200 |
200 |
178 |
750 |
300 |
220 |
56 |
MS-NHM250 |
250 |
178 |
750 |
350 |
220 |
70 |
MS-NHM300 |
300 |
178 |
750 |
400 |
220 |
84 |
MS-NHM350 |
350 |
200 |
1110 |
450 |
300 |
110 |
MS-NHM400 |
400 |
200 |
1110 |
500 |
300 |
124 |
MS-NHM450 |
450 |
200 |
1110 |
550 |
300 |
140 |
MS-NHM500 |
500 |
200 |
1110 |
600 |
300 |
160 |